|
Some of the following extension wands, like the basic steel and plastic wands, will fit nearly all central vacuum systems. Wands with a plastic channel on the top, and "cord" name, will fit electrified hoses that have the measurements found the Electric Hose page located on the left navigation.
|
 |
Click to enlarge |
Telescopic Cord Channel Wand Part#406ST
Fits electric carpet brushes that have a button-lock hole in the connection neck such as the original Stealth. Wand adjusts for ergonomically correct vacuuming and has a plastic cord channel on top of it that receives any size electric cord with two beveled edges (Use #480AC below to adapt any two or three pin cord). It also has a button lock nipple on the bottom and button lock hole on the top. NOTE: The middle grip for sliding may come as a single button, not a wrap around.
|
|
Click to enlarge |
Cord Channel Upper Wand Part#406SU
Includes button lock hole on top and button lock nipple on the bottom. A cord channel holds the electric power brush cord in place for connection to an electric vacuum hose. Fits into the lower wand (part 406SL). Size: 19 inches long, 1.25 inch inner diameter. Center of button lock and hole are 1 3/8 inch from ends (it is okay if there is a difference with what it mates to). When the cord is inserted in the top plastic channel cord holder, the distance between the top of the cord pins to the top of the metal wand is one inch (the perfect fit for all electric hoses in the shopping cart). Measurement; 18 1/2-inch. Plastic Channel measures 1 1/8-inch
|
|
Click to enlarge |
Cord Channel Lower Wand Part#406SL
Includes button lock hole on top and bottom lock nipple on the bottom. A cord channel holds the electric power brush cord in place. Fits into the upper wand (part 406SU). Size: 18 1/2 inches long, 1.25 inch inner diameter. Center of button lock and hole are 1 3/8 inch from ends.
|
|
Click to enlarge |
Telescopic Ratchet Wand - Friction Top, Bottom Part#406T
The Telescope Ratchet Wand is a great addition to any air-driven non-electric power brush system. It has friction locking, and no button locks. Measurement; 39 1/4-inch
|
|
Click to enlarge |
Telescopic Wand - Button Lock Top - Friction Btm Part#406TB
The Telescope Wand is a great addition to any air-driven non-electric power brush system. It has friction locking at the bottom and a button lock hole at the top.
Measurement; 38 1/2-inch
|
|
Click to enlarge |
Telescopic Plastic Wand - Friction Top, Bottom Part#406PT
The Telescope Plastic Wand is sturdy and very light weight. It fits all standard non-electric accessories and all standard hoses. It has friction locking, and no button locks. Measurement: 39 1/4-inch
|
|
Click to enlarge |
19in Central Vacuum Chrome Extension Tube Wand Part#406
The 18 3/4-inch Central Vacuum Chrome Extension Tube Wand is sold individually. To obtain the correct vacuuming height, it is recommended to buy two. It's made with friction locking without button locks. With a diameter of 1.25 inches, this tube wand fits 99% of all central vacuum accessories, attachments and hoses.
|
|
Click to enlarge |
18-inch Plastic Wand Part#406P
Connect several of these 18-inch Plastic Wands together to dust rooms with high ceilings. Use two for hard floor brushes. Fits any perfectly round vacuum hose and/or wand.
|
|
Click to enlarge |
Clip-on Tool Caddy Part#407H
Clips to any wand 1-1/4" wide and attach crevice, dusting, and upholstery tools for convenient access!
|
|
Click to enlarge |
Wand Wall Clamp Part#407W
The Wand Wall Clamp is easy to use and is a real space saver, getting any vacuum, brush and/or wands out of the way. It only needs two screws to install (use drywall anchors if needed). Click the photo to see a picture of the Wand Wall Clamp in "action."
|
|
Click to enlarge |
Generic Upper Wand, Grey Part#406H
Upper section of the Hayden extension tube will fit with both newer and older style Hayden wand systems. 17 1/2-inch metal wand. Plastic channel measures 3/4-inch. Top button hole starts 3/8 inch down and button nipple starts 1 5/16 inch up from the bottom. (Also fits Kenmore PowerMate Sears #4148753 Wand and cord mount assembly, and some AirVac VM 454.)
|
|
Click to enlarge |
Generic Upper Wand, Ivory Part#406HI
(Grey wand pictured) Upper section of the Hayden extension tube will fit with both newer and older style Hayden wand systems. Top button hole starts 3/8 inch down and button nipple starts 1 5/16 inch up from the bottom. 17 1/2-inch metal wand. (Also fits Kenmore PowerMate and some AirVac VM 454.)
|
|
Click to enlarge |
Generic Lower Wand, Super System, Grey Part#406HS
This gray colored lower extension wand is for Hayden Super Systems and Sears part number 4369398 Wand and Cord Lower. It is the lower wand for all of these kit brushes: CT20DXQD, CT20DXQS, CT18DXQD, CT18DXQS, CT16DX, CT14DX, CT14L, CT12DXL, CT210, CT110, CPB100. (Also fits Kenmore PowerMate and some AirVac VM 454.
Measurement: 17 1/4-inches long BUT the cord is 28 inches long (shorter than some older ones) so buying the upper wand #406H (17-3/8" metal) will make sure you get the perfect fit. (FYI, the six inch adapter cord we sell is not compatible with this cord end.)
|
|
Click to enlarge |
Generic Lower Wand, Super System, Ivory Part#406HSI
This ivory colored lower extension wand is for Hayden Super Systems. It is the lower wand for all of these kit brushes: CT20DXQD, CT20DXQS, CT18DXQD, CT18DXQS, CT16DX, CT14DX, CT14L, CT12DXL, CT210, CT110, CPB100. (Also fits Kenmore PowerMate and some AirVac VM 454.)
Measurement: 17 1/4-inches long BUT the cord is 28 inches long (shorter than some older ones) so buying the upper wand #406HI (17-3/8" metal) will make sure you get the perfect fit. (FYI, the six inch adapter cord we sell is not compatible with this cord end.)
|
|
Click to enlarge |
Generic Lower Wand Old Style Part#406HL
Before Hayden Central Vac produced the quick release system, this lower extension wand section was used. This 17-1/2 inch wand can also be used in many other systems. The top button hole starts 3/8 inch down and the button nipple starts 1 5/16 inch up from the bottom. (Also fits Kenmore PowerMate and some AirVac VM 454.)
|
|
Click to enlarge |
Lower Wand, Hayden-PowerMate to Electric Hose Part#406HSP
Connect certain vacuum nozzles to the crush proof electric hose (instead of the Hayden or PowerMate hose). Must use part# 406SU as well for a perfect, seamless fit. Compatible with: CT20DXQD, CT20DXQS, CT18DXQD, CT18DXQS, CT16DX, CT14DX, CT14L, CT12DXL, CT210, CT110, CPB100. (Also fits Kenmore PowerMate and some AirVac VM 454.)
Measurement: 17.25 inch and the cord extends above it 20.5 inches. The total length of the cord is 32.25 inches.
|
|
Click to enlarge |
6-inch Adapter cord to lengthen power brush cord Part#480AC
This 6-inch adapter cord allows any electric power brush cord to fit into the plastic channel of the Cord Channel Upper Wand part 406SU or Telescopic Wand part 406ST. The upper wand will then be ready for any of the Electric Hoses to fit directly into it - conveniently connecting both the electrical prongs from the powered carpet brush and the wands to the hose handle. This cord fits 3-prong cords because the third prong is no longer required.
|
|
Click to enlarge |
Stealth II Telescopic Wand Part#406STQ
Sturdy, ratcheting, hidden cord channel Stealth II Telescopic Wand. Used for Quick Click Applications only. Shelf where the two pins are is stright across toward the metal pole.
|
|
Click to enlarge |
Button Lock C Clip Part#300B
 3 Reviews - 0 Comments This is used to replace a button lock on an extension wand or to create your own.
|
|
|
Visitors who viewed this page also visited:
Wood, Tile, and other Hard Floor Vacuum Tools
Electric Powered Central Vacuum Kits
Air Powered Central Vacuum Kits
|
Made in the USA
View Cart Dealer Login
1404 Reviews 
MD
Videos
