Using Your EdgeLift Power Head
1. ON CARPETS. No special setup is required for vacuuming carpets. Simply assemble your power head as instructed above, turn it "ON" and start vacuuming.
2. ON BARE FLOORS. For vacuuming on bare floors, keep your vacuum running, but turn your power head "OFF" so the brush roll is not spinning. The brush roll is designed to agitate and groom your carpets, and serves no function on bare floors. However, if the brush roll's bristles happen to be positioned vertically instead of horizontally, they may block dirt from flowing up into the nozzle and may "plow" the dirt instead. So if you see that your power head is not picking up all the dirt and debris when vacuuming bare floors, turn the brush roll "ON" for a few seconds, to spin the dirt and debris past the bristles, into the nozzle and into your vacuum cleaner.
3. REACH INTO CORNERS. For unprecedented corner-cleaning power, your power head features innovative Boosters on its left and right sides. Each Booster has an angled, forward "scoop" that reaches into corners to pull dust and dirt which other power heads leave behind.
4. TRUE EDGE-CLEANING. For extra edge-cleaning power, the Boosters’ angled scoops and rear dirt intakes ensure maximum edge-cleaning on forward and backward strokes.
|
IMPORTANT NOTICE! Do not use the powerful EdgeLift power head on natural fiber carpets including those of wool or silk, as fiber damage may occur. |
Warranty
M.D. Manufacturing, Inc., warrants the EdgeLift itself with a Lifetime Belt Warranty, a 3-year Motor and components warranty, and a 2-year warranty on the hose and attachments. This warranty does not include damage to the product resulting from accident, misuse, or repairs performed by unauthorized personnel. If the product should become defective within the warranty period, or you have questions regarding the warranty or service, call Customer Service at 800-997-2278.
Technical How-To's:
Convert EdgeLift Hose.
The EdgeLift Hose comes as a pigtail wall-end corded hose, and is easily converted to direct connect using the included two pin plug. Click here to view a tip video that shows you how to switch between the two with two screws on the wall end of the hose.
Convert Quick Click Hose. Quick Click comes as a pigtail wall-end corded hose, and is easily converted to direct connect. NOTE: Instructions for converting the ivory hose and Hamni hose are different, but are included with your purchase. Click here to see how to switch between the two with no screws on the wall end of the hose.
Change Motor. To change the motor follow these motor directions (PDF 1.8MB)
Change Belt, Elbow, and Remove Cover videos here.
|
Made in the USA
View Cart Dealer Login 
1713 Reviews 
15355 Reviews
MD
Videos
