Central Vac Inlet Valve Covers for Fasco Central Vacuum
All Products for Fasco
Most all inlets are universal, meaning they have two screws four inches apart that hold them in place. Fasco vacuum inlet ports are all universal. Vacuum inlets come in a variety of colors and shapes and are interchangeable. Replacing inlets is not difficult and the video on the left is a tutorial and shows the most durable style. Take a moment to determine if your inlets are Basic or Electric. Both inlet types have two metal contacts inside the 1-1/2 inch diameter hole, when shorted the suction starts. Electric inlets have these contacts and two small 110 volt connection holes 3/8 inch apart along the top or bottom of the main hole. Screws come with the inlet and are 1-1/2 inches long.
Basic Inlet Valves for Fasco Central Vacuums
Central Vacuum Inlet, Full Face, PVC
Central Vacuum Inlet Cover, Full Face, PVC
Wall plate contains low voltage connections only. There are two metal contact points inside the hole of the vacuum valve. Valves, faceplates, with two holes on the face of the plate that are for 110 volt electricity are available under Electric Valves. If you need a case of these inlets enter 24.
Can be installed to open up or down. All rectangle valves on this page are interchangeable. Outer dimensions: 3-1/8" by 4-7/8". HAYDEN IND 2000. Trim cover is available.



$10.35 Part #653HA
QTY
In Stock
 
Bookmark and Share
Central Vacuum Inlet, Square Door, PVC
Central Vacuum Inlet Cover, Square Door, PVC
Wall plate contains low voltage connections. There are two metal contact points inside the hole of the valve. Valves with two holes on the face of the plate that are for 110 volt electricity are available under Electric Valves. If you need a case of these inlets enter 24. Can be installed to open up or down. Outer dimensions: 3-1/8" by 4-7/8". HM-1700. Replaces HAYDEN MFG 1700. Trim cover is available.



$8.75 Part #652HA
QTY
In Stock
 
Bookmark and Share
Central Vacuum Inlet, Oval Door, PVC
Central Vacuum Inlet Cover, Oval Door, PVC
Wall plate contains low voltage connections only. There are two metal contact points inside the hole of the valve. Valves with two holes on the face of the plate that are for 110 volt electricity are available under Electric Valves. If you need a case of these inlets enter 24.
Can be installed to open up or down. All rectangle outlet valves on this page are interchangeable. Outer dimensions: 3-1/8" by 4-7/8". HM-1500. Replaces HAYDEN MFG 1500. Trim cover is available.



$7.75 Part #651HA
QTY
In Stock
 
Bookmark and Share
Central Vacuum Inlet Trim Cover
Central Vacuum Inlet Trim Cover
Want a clean, fresh looking wall? When you replace the inlet valve add this trim cover behind it. It will cover a bit more of the wall and the uneven paint that was right up against the old cover. Also great for covering mistakes.
Dimensions: 4-1/8" by 5-7/8". Inner ridge that inlet sits in: 3-1/8" by 4-7/8".
Fits inlet valves with an "H" in the product number.



$2.00 Part #651HTA
QTY
In Stock
 
Bookmark and Share
Central Vacuum Inlet, Canplas VacuValve, PVC
Central Vacuum Inlet Cover, Canplas VacuValve, PVC
Wall plate contains low voltage connections only. There are two metal contact points inside the hole of the valve. If you need a case of these inlets enter 32.
Can be installed to open up or down. All rectangle outlet valve faceplates on this page are interchangeable. Replaces Vacuflo inlets that look just like this. Outer Dimension: 3-1/2" by 5-3/16". VacuValve 5590, 5595. Trim plate is available.




$10.60 Part #653CA
QTY
In Stock
 
Bookmark and Share
Central Vacuum Inlet Trim Cover, Canplas VacuValve
Central Vacuum Inlet Trim Cover, Canplas VacuValve
Want a clean, fresh looking wall? When you replace the inlet valve add this trim cover behind it. It will cover a bit more of the wall and the uneven paint that was right up against the old cover. Also great for covering mistakes.
Dimensions: 4-1/2" by 6-3/16". Inner ridge that inlet sits in: 3-1/2" by 5-3/16". Thickness is 3/8".
Fits inlet valves with a "C" in the product number.




$2.50 Part #653CTA
QTY
In Stock
 
Bookmark and Share
Central Vacuum Inlet, Oval, METAL
Central Vacuum Inlet, Oval, METAL
Contains low voltage connections only. There are two metal contact points inside the hole of the valve. Metal inlets are recommended for decoration, outdoors, or in the floor.
Can be installed to open up or down. All rectangle valves on this page are interchangeable. Outer dimensions: 3 1/8" by 4 7/8".




$40.00 Part #651BMB
QTY
In Stock
 
Bookmark and Share
Electrified Inlet Receptacle and Cover for Fasco Central Vacuums
SuperValve Inlet Cover Kit FullFace
SuperValve Inlet Cover Kit, Full Face
Universal Super Valve has connections for both low voltage wire (starts the power unit for suction) and high voltage wire (runs the electric power brush). Includes: rough-in mounting plate with J-box, and faceplate (not sold separately). Made by Hayden. Outer dimensions: 3-1/8" by 4-7/8". If you need a case of these inlets enter 10. Manufacturer's markings: HAYDEN MFG INLET VALVE ASSEMBLY #2050 SUPER-HOSE.



$26.80 Part #663HA
QTY
In Stock
 
Bookmark and Share
SuperValve Inlet Cover Kit Square Door
SuperValve Inlet Cover Kit, Square Door
Universal Super Valve has connections for both low voltage wire (starts the power unit for suction) and high voltage wire (runs the electric power brush). Includes: rough-in mounting plate with J-box, and faceplate (not sold separately). Made by Hayden. Outer dimensions: 3-1/8" by 4-7/8". If you need a case of these inlets enter 10. Manufacturer's markings: HAYDEN MFG INLET VALVE ASSEMBLY #1750 SUPER-HOSE.




$23.00 Part #662HA
QTY
In Stock
 
Bookmark and Share
Central Vacuum Inlet Trim Cover
Central Vacuum Inlet Trim Cover
Want a clean, fresh looking wall? When you replace the inlet valve add this trim cover behind it. It will cover a bit more of the wall and the uneven paint that was right up against the old cover. Also great for covering mistakes.
Dimensions: 4-1/8" by 5-7/8". Inner ridge that inlet sits in: 3-1/8" by 4-7/8".
Fits inlet valves with an "H" in the product number.



$2.00 Part #651HTA
QTY
In Stock
 
Bookmark and Share
ElectraValve Inlet Cover
ElectraValve Inlet Cover
Colored PVC inlet valve made exclusively to fit the ElectraValve rough-in parts above. If you need a case of these enter 32. Outer Dimension: 3 1/2" by 5 3/16".





$12.90 Part #663CA
QTY
In Stock
 
Bookmark and Share
Central Vacuum Inlet Trim Cover, Canplas VacuValve
Central Vacuum Inlet Trim Cover, Canplas VacuValve
Want a clean, fresh looking wall? When you replace the inlet valve add this trim cover behind it. It will cover a bit more of the wall and the uneven paint that was right up against the old cover. Also great for covering mistakes.
Dimensions: 4-1/2" by 6-3/16". Inner ridge that inlet sits in: 3-1/2" by 5-3/16". Thickness is 3/8".
Fits inlet valves with a "C" in the product number.




$2.50 Part #653CTA
QTY
In Stock
 
Bookmark and Share
Toe Kick Vacuums for Fasco Central Vacuums
Central Vacuum Vac Pan, Toe Kick
Central Vacuum Vac Pan, Toe Kick
The VacPan and other under the cabinet or similar in wall toe kick operated central vacuum ports such as Vacu-Sweep are a great addition to any system. Vac-Pan and VacuSweep installation should be done by a professional installer or serious do-it-yourselfer. They are a wonderful product; however, the installation process is moderate to difficult. Be sure to have all the instructions, fittings, pipe, low voltage wire, and other things for installation also available here.




$49.00 Part #670PA
QTY
In Stock
 
Bookmark and Share
Trim Faceplate for VacPan
Trim Faceplate for VacPan
A trim plate is used when the access hole into which the VacPan is fitted is larger than the VacPan's face plate. If you need a case of these inlets enter 50. Size 10.5" x 4".





$15.25 Part #670PFS
QTY
In Stock
 
Bookmark and Share
Canplas VacuSweep
Canplas VacuSweep
VacuSweep's main difference from VacPan is the pipe connection, instead of being on the top, is on the back. Face measurement is 8.5 x 2.625 inches. In some cases it will make the installation easier. The connection on the back fits a coupling, elbow, or flex-pipe.VacuSweep's Website has video, manuals and helpful information.




$45.00 Part #670CA
QTY
In Stock
 
Bookmark and Share
Canplas VacuSweep Trimplate
Canplas VacuSweep Trimplate
Used when you need to cover a larger access hole than the VacuSweep itself will cover. 10.5 x 4 inches.




$6.00 Part #670CTA
QTY
In Stock
 
Bookmark and Share
Pipe and Installation Parts Outlet for Fasco Central Vacuums
We have everything you need to install a central vacuum in new construction or existing homes - or to add a valve. Standard PVC vacuum pipe has a 2-inch outer diameter and connects with PVC glue into elbows and joints.
Our Installation home page is full of links on everything you need to know about installation. Also use our Installation Parts Guide to quickly figure out all the supplies needed. Or visit our complete list of installation parts.
Install Kit with 1 Electric Inlet
Install Kit with 1 Electric Inlet
Includes the items pictured and comes in a handy box straight off our warehouse shelf. Add pipe (40ft recommended) and maybe some extra couplings. Buy regular PVC cement from a local store. Includes one pure white inlet valve and backing plate. The included wire is low voltage and runs from the faceplate to the vacuum canister to turn it on. In addition, Romex (110 volt) wire from a local store is need for the 110 volts. The faceplates' 110 volt wires connect to the romex you stub out from the backing plate box during rough-in. Made by Hayden.
$43.00 Part #662HW1
QTY
In Stock
 
Bookmark and Share
Install Kit with 1 Non-Electric Inlet
Install Kit with 1 Non-Electric Inlet
Includes the items pictured and comes in a handy box straight off our warehouse shelf. Add pipe (40ft recommended) and maybe some extra couplings. Buy regular PVC cement from a local store. Includes one pure white inlet valve and backing plate. The included wire is low voltage and runs from the backing plate to the vacuum canister to turn it on. The wire does NOT have 110 volts. Made by Hayden.
$34.00 Part #652HW1
QTY
In Stock
 
Bookmark and Share
90 Short PVC Vacuum Connector
90 Short PVC Vacuum Connector
Use this fitting at the mounting plates only. Since this is the sharpest turn in the system, potential clogging will occur with easy access - right at the inlet valve! If you need a case, enter 90 for the quantity.
$1.35 Part #501
QTY
In Stock
 
Bookmark and Share
90 Sweep PVC Vacuum Connector
90 Sweep PVC Vacuum Connector
M.D. Manufacturing sells the highest quality fittings. We suggest avoiding PVC sch40 fittings. They are thin and leave a 'step' where the pipe connects. Toothpicks or pins can get stuck creating clogs. Also make sure fittings have a 3/4" cuff, not 1/2", to provide strength at joints. If you need a case, enter 115 for the quantity.
$1.50 Part #502
QTY
In Stock
 
Bookmark and Share
45 Degree PVC Vacuum Connector
45 Degree PVC Vacuum Connector
We suggest using 45's, even two of them when possible, to use less 90's. When the pipe line needs to run up or down, angle a 90 at 45-degrees into a 45 fitting. If you need a case, enter 125 for the quantity.
$1.35 Part #504
QTY
In Stock
 
Bookmark and Share
Coupling PVC Vacuum Connector
Coupling PVC Vacuum Connector
For connecting two pieces of pipe together. If you need a case, enter 200 for the quantity.
$0.65 Part #507
QTY
In Stock
 
Bookmark and Share
90 Sweep Tee PVC Vacuum 3-way Connector
90 Sweep Tee PVC Vacuum 3-way Connector
For connecting a branch to the main line. Be sure the airflow is adequate. Do not install the tee backwards! If you need a case, enter 45 for the quantity.
$2.05 Part #508
QTY
In Stock
 
Bookmark and Share
3-in-1 Mounting Bracket PVC
3-in-1 Mounting Bracket PVC
Most popular bracket for all rectangle Basic Inlet Valve Covers. For new construction nail it to a stud. For existing home installation cut the plastic stud mounting side off and set it in a 2-3/8 x 4-1/4" drywall (or wall material) cutout and fasten inlet cover (with previously attached low voltage wire) for a long lasting, firm hold. When piping, connect a fitting such as a tight 90 or coupling to the flange. If you need a case of these enter 75.
$3.90 Part #517
QTY
In Stock
 
Bookmark and Share
16ft PVC Central Vacuum Pipe (four 4-foot tubes)
16ft PVC Central Vacuum Pipe (four 4-foot tubes)
Great for small central vacuum jobs such as repairs, relocating a valve, adding a valve, exhausting, etc. Be sure to get extra PVC couplings (below) to fit it all together. This vacuum tubing is 2-inch outer diameter. Manufactured to ASTM standard F2158.
$32.40 Part #520-4
QTY
In Stock
 
Bookmark and Share
40ft PVC Central Vac Pipe (ten 4-ft) (Ground Ship)
40ft PVC Central Vac Pipe (ten 4-ft) (Ground Ship)
Great for medium central vacuum jobs such as repairs, relocating a valve, adding a valve, exhausting, etc. Be sure to get extra PVC couplings (below) to fit it all together. This vacuum tubing is 2-inch outer diameter. Manufactured to ASTM standard F2158.
SHIPPED REGULAR GROUND ONLY.
$53.10 Part #520-10
QTY
In Stock
 
Bookmark and Share
2inch ID Flexible Pipe Vacuum Hose (per/foot)
Flexible Pipe (sold by foot)
Flex Pipe is excellent for installing VacPan automatic dustpans. Central Vacuum 2" OD PVC pipe fits snugly into this flexible pipe that is 2" ID. Use a Hose Clamp for Flex Pipe for best connection, do not glue. Not recommended as a replacement for rigid pipe.
SOLD BY THE FOOT. Enter number of feet you need.
$3.85 Part #340
QTY
In Stock
 
Bookmark and Share
 
Note: Fasco Vacuum is a registered trademark of Fasco, not M.D. Manufacturing, Inc. Products sold by M.D. Manufacturing, Inc. are not from Fasco Vacuum but are designed to complement a Fasco Central Vacuum. Therefore, parts and products carry warranties from MD Manufacturing and not Fasco Vacuum and thus may alter the warranty provided by Fasco Vacuum.
Need more help? Try our extensive and helpful Fasco Vacuum Questions and Answers or give us a call at 1-800-997-2278 M-Th 7 a.m. to 5 p.m. Pacific Standard Time.