Vacuum Cleaner Parts for Kenmore Central Vacuum
All Products for Kenmore
PowerMate Vacuum Replacements and Parts Kits (aka Hayden)
Electric Power-Mate Vacuum Cleaner

The original Power-Mate Vacuum was made by Matsushita, who also supplied a vacuum company called "Hayden," who MD still sells for. The good news for Kenmore vacuum customers in need of replacement parts is that WE HAVE THEM. The parts listed below and all "Hayden" parts on our website fit the Power-Mate Brush and System.
PowerMate Replacement Vacuum Brush with Wands
PowerMate Replacement Vacuum Brush with Wands
Start Fresh with a new Power-Mate Replacement Vacuum cleaner power brush for Kenmore central vacuum systems - Kenmore PowerMate Vacuum by Matsushita is this same vacuum. Some older ones didn't have the quick disconnect though as this one does. But that doesn't matter because this vacuum comes with the chrome wands that connect it to the long Kenmore vacuum hose. This item is also known as "Hayden". Replaces many models including 116.5561190.
$229.00 Part #480I-PM
QTY
In Stock
 
Hayden Grey Electric Vacuum Brush with Wands
PowerMate Grey Electric Vacuum Brush with Wands
Grey brush and chrome wands that connect to the Sears-type central vacuums. (To open the brush to access the belt - pop the top portion off with a screw driver. The screws are underneath it.) Also known sold under Panasonic and Hayden.
$229.00 Part #480-PM
QTY
In Stock
 
Ace Electric Brush
14in Ace Electric Brush
Excellent value electric beater brush for carpets. This power brush is a modern version of older PowerMate power brushes. It is quieter, breaks fewer belts, lower profile, and has closer edge cleaning. Interchangeable with most PowerMate Central Vacuums, PowerMate Whisper Belt, and PowerMate Models 1165381330, 11623812300, 11623813300, KC50XBZRZU01 and others.

$206.95 Part #485-PM
QTY
In Stock
 
Belt for Sears Kenmore PowerMate
Belt for Sears Kenmore PowerMate
Replacement vacuum belt, cogged, fits Sears Kenmore Power-Mate Central Vacuum System. This item is also known as "Hayden". Replaces belts including 20-5285.
$4.30 Part #48045-PM
QTY
In Stock
 

V-Belt for Whisper-Belt Brush
Poly V-Belt Style Belt is the replacement belt for Kenmore PowerMate Whisper-Belt Units. Belt is 5/16" wide, 5-1/4" long when flattened, 3-1/2" when circular, and 5 peaks and 4 grooves.
$8.45 Part #48520-PM
QTY
In Stock
 

Swivel Seal for Ace, Hayden, Others
Part number also 4223. SOLD INDIVIDUALLY
$0.75 Part #48519
QTY
In Stock
 
Generic 6ft Cord for SuperVac Hose
Generic 6ft Cord for Electric Hoses
Replacement electric cord with molded in fuse attaches to the two-pin wall end of electric hoses. Electric hoses with two-pin connections are all generic. This cord can also be used to convert Hayden SuperVac Hoses from direct connect to corded, and can also be used to replace Kenmore Sears Hose L-shaped fuse and cord both.



$21.00 Part #342COB
QTY
In Stock
 
Hayden 39 inch power cord old style ivory
Hayden 39 inch power cord old style ivory
Only available in Ivory, not Grey.
$34.00 Part #480CI
QTY
Not In Stock
 
Hayden SuperHose 2-Prong Male Plug Grey
Hayden SuperHose 2-Prong Male Plug Grey
Replacement plug for Hayden hose end that mates to 110 volt holes in the wall valve. Comes in grey.
$12.20 Part #342MP
QTY
In Stock
 
Roller Brush Replacement for PowerMate
Roller Brush Replacement for PowerMate
Roller Brush replacement for Power-Mate Central Vacuum Systems includes end bushings and complete brush and beater bar as pictured. This item is also known as "Hayden". The new wood construction - with bristles only - is the new universal replacement . Includes the bushings on both ends of the brush and with them it is 14 inches long, bristles are 3/8" tall.
$55.60 Part #48035-PM
QTY
In Stock
 
Power Brush Motor for Hayden (and many others)
Power Brush Motor (Many Brands)
Motor for many vacuum cleaners. May come in black.

Fits all Hayden, all Sears Kenmore PowerMate that look like the Hayden brush (including KC90FCAL1000)(Part 4190), all CT-14L, CT-14DX, CT-16DX, and some sold under the brand names Nutone, M & S, AirVac, Nutone, Vacumaid, Panasonic, and Galaxie, to name a few. Motor is 2-3/8" tall, 4-5/8" long, and 2-11/16" wide. The belt gear had teeth, not grooves.

$59.50 Part #48044
QTY
In Stock
 
Hayden Superhose Female Receptacle
Hayden Superhose Female Receptacle
This part is used to replace the two holes for electricity in the Hayden Super Hose handle. May come in grey or ivory.
$12.50 Part #342FR
QTY
In Stock
 
Power Brush Cord for Hayden (and many others)
Power Brush Cord for Hayden (and many others)
This item goes inside the Hayden style vacuum cleaner head. The two pins are exposed outside the head. May come in ivory or grey.

Cord(MFG Part# EB24032 or 4218) is the replacement for these power brushes as well: CT-12DXL, CT-14DX, CT-16DX, CT-18DXQD, CT-18DXQS, CT-20DXQD, CT-20DXQS that were sold under the brand names Nutone, Vacuflo, M & S, AirVac, Vacumaid, Beam, Panasonic, and Galaxie, to name a few.

$15.85 Part #48015G
QTY
In Stock
 
Hayden Vacuum Hose Switch Replacement
Vacuum Hose Switch Replacement
Hose handle switch is a three way switch, rocking backward and forward. Replaces Hayden Vacuum Hose Switch (that hose has been used with many brands). View the #342S Wiring Diagram
$12.25 Part #342S
QTY
In Stock
 
Generic Lower Wand, Super System, Ivory
Generic Lower Wand, Super System, Ivory
This ivory colored lower extension wand is for Hayden Super Systems. It is the lower wand for all of these kit brushes: CT20DXQD, CT20DXQS, CT18DXQD, CT18DXQS, CT16DX, CT14DX, CT14L, CT12DXL, CT210, CT110, CPB100. (Also fits Kenmore PowerMate and some AirVac VM 454.)
Measurement: 17 1/4-inches long BUT the cord is 28 inches long (shorter than some older ones) so buying the upper wand #406HI (17-3/8" metal) will make sure you get the perfect fit. (FYI, the six inch adapter cord we sell is not compatible with this cord end.)
$29.00 Part #406HSI
QTY
In Stock
 
Bulb Replacement for PowerMate
Bulb Replacement for PowerMate
Light Bulb Replacement for Sears Kenmore Power-Mate Central Vacuum System. This item is also known as "Hayden".
$5.50 Part #48012-PM
QTY
In Stock
 
Replacement Cord for PowerMate Vacuum Head
Replacement Cord for PowerMate Vacuum Head
Replacement Cord for Power-Mate Central Vacuum Power Head is the small cord that is attached to the vacuum head itself at all times. It has the two male pins that receive the longer cord attached to the chrome wands. This item is also known as "Hayden".
$15.85 Part #48015G-PM
QTY
In Stock
 
Attachment Set
Attachment Set
Attachment Set includes these tools: crevice, dusting, upholstery, and floor brush with snap in hole. This item is also known as "Hayden".
$36.00 Part #400I-PM
QTY
In Stock
 
Hayden 4-piece Tool Set, Grey
4-piece Tool Set, Grey
In the 4-piece tool set the large floor brush has a button lock hole to attach to the metal extension wands. All other attachments do not have these holes but are "friction fit".
$36.00 Part #400G-PM
QTY
In Stock
 
Metal Stub Tube for 1.25 inch vacuum inlets
Metal Stub Tube - Inlet Valves 1.25 Inch Diameter
Used to adapt a hose to fit Budd or Kenmore / Sears inlets and others that are 1.25 inch diameter (ones that start suction when OPENED). This adapter tightly slides into the end of the hose leaving the tapered end visible (we recommend tapping it in AT LEAST 3/4 INCH with rubber mallet or piece of wood). It fits into all Low Voltage, Electric Hoses, and Stretch Hoses. If it needs to go into a Basic Hose, it will only fit the Basic Hose with Tapered Cuff. (Note: the Reduced Tapered Cuff product is made up of the Tapered Cuff and this Metal Stub Tube.)
$6.75 Part #302-1.25ST
QTY
In Stock
 
Air Driven Vacuum for Kenmore Central Vacuum
Air Driven Vacuum for Kenmore Central Vacuum
The air-driven Turbocat (aka TurboCat, II, TurboCat Plus, TL2000, Ultra T210, TP210) power brush will fit your existing Kenmore system. It works wonderfully for homes with little carpeting. Homes with several carpeted rooms will benefit greatly with an electric carpet brush and hose. The carpet will be cleaner than ever! If you want to upgrade, you will also love how easy it is to use the newer lightweight, crushproof, full swivel hose. See above for details on the complete Stealth Attachment Kit for Kenmore.
$99.00 Part #455-PM
QTY
In Stock
 
Generic Lower Wand, Super System, Grey
Generic Lower Wand, Super System, Grey
This gray colored lower extension wand is for Hayden Super Systems and Sears part number 4369398, 4170-L2, 4170-L Wand and Cord Lower. It is the lower wand for all of these kit brushes: CT20DXQD, CT20DXQS, CT18DXQD, CT18DXQS, CT16DX, CT14DX, CT14L, CT12DXL, CT210, CT110, CPB100. (Also fits Kenmore PowerMate and some AirVac VM 454.
Measurement: 17 1/4-inches long BUT the cord is 28 inches long (shorter than some older ones) so buying the upper wand #406H (17-3/8" metal) will make sure you get the perfect fit. (FYI, the six inch adapter cord we sell is not compatible with this cord end.)
$29.00 Part #406HS
QTY
In Stock
 
Generic Upper Wand, Ivory
Generic Upper Wand, Ivory
(Grey wand pictured) Upper section of the Hayden extension tube will fit with both newer and older style Hayden wand systems. Top button hole starts 3/8 inch down and button nipple starts 1 5/16 inch up from the bottom. 17 1/2-inch metal wand. (Also fits Kenmore PowerMate and some AirVac VM 454.)
$11.75 Part #406HI
QTY
In Stock
 
Generic Lower Wand Old Style
Generic Lower Wand Old Style
Before Hayden or Kenmore Central Vac produced the quick release system, this lower extension wand section was used. This 17-1/2 inch wand can also be used in many other systems. The top button hole starts 3/8 inch down and the button nipple starts 1 5/16 inch up from the bottom. (Also fits Kenmore PowerMate and some AirVac VM 454.)
$15.00 Part #406HL
QTY
In Stock
 
Upper Wand for PowerMate Central Vacuum
Upper Wand for PowerMate Central Vacuum
Upper Wand for Power-Mate Central Vacuum System. This item is also known as "Hayden".
$11.75 Part #406HI-PM
QTY
In Stock
 
Generic Upper Wand, Grey
Upper Wand for PowerMate, Grey
Upper section of the tube will fit with both newer and older style wand systems. 17 1/2-inch metal wand. Plastic channel measures 3/4-inch. Top button hole starts 3/8 inch down and button nipple starts 1 5/16 inch up from the bottom. (Also fits Kenmore PowerMate Sears #4148753 Wand and cord mount assembly.)
$11.75 Part #406H-PM
QTY
In Stock
 
Lower Wand for PowerMate Central Vacuum
Lower Wand for PowerMate Central Vacuum
Lower Wand for Power-Mate Central Vac System. This item is also known as "Hayden".
$29.00 Part #406HSI-PM
QTY
In Stock
 
Generic Lower Wand, Super System, Grey
Lower Wand for PowerMate, Grey
This gray colored lower extension wand is for Sears part number 4369398 Wand and Cord Lower. Measurement: 17 1/4-inches long BUT the cord is 28 inches long (shorter than some older ones) so buying the upper wand #406H (17-3/8" metal) will make sure you get the perfect fit.
$29.00 Part #406HS-PM
QTY
In Stock
 
Older Lower Wand for PowerMate
Older Lower Wand for PowerMate
Before the quick release system, this lower extension wand section was used. Top button hole starts 3/8 inch down and button nipple starts 1 5/16 inch up from the bottom. The vacuum cleaner that it fits into in no longer produced. Item is also known as Hayden.
$15.00 Part #406HL-PM
QTY
In Stock
 
 


Need more help? Try our extensive and helpful Kenmore Vacuum Questions and Answers or give us a call at 1-800-997-2278 M-Th 7 a.m. to 5 p.m. Pacific Standard Time.
 
*Note: Kenmore Vacuum is a registered trademark of Sears, not M.D. Manufacturing, Inc. Products sold by M.D. Manufacturing, Inc. are not from Kenmore Vacuum but are designed to complement a Kenmore Central Vacuum. Therefore, parts and products carry warranties from MD Manufacturing and not Kenmore Vacuum and thus may alter the warranty provided by Kenmore Vacuum.