 The Low Voltage Hose fits 99% of central vacuum wall ports on the market no matter how new or old. Please consider the wall end (pictured) fits standard wall ports or inlets are 1.5 inches in diameter or just under. If around 1.25 inches buy the 1.25 adapter below. If just over 1.5 inches use the Tapered Cuff below and slide it over the hose end. Click here for Parts for Low Voltage Hose.
|
 |
|
Tapered Cuff - Inlet Valves 1.5+ Inches Diameter
Tapered Cuff screws onto Basic Hoses (ones without a switch on the handle). It then fits valves slightly larger than 1.5" diameter such as Filtex metal inlets, some AstroVac, VacuMaid, and others. This cuff will not work with valves having two metal contact points inside the inlet insertion hole. Basic Hoses #302TC and 303TC ship with this cuff included.
|
|
|
|
Metal Stub Tube - Inlet Valves 1.25 Inch Diameter
Used to adapt a hose to fit Budd or Kenmore / Sears inlets and others that are 1.25 inch diameter (ones that start suction when OPENED). This adapter tightly slides into the end of the hose leaving the tapered end visible (we recommend tapping it in AT LEAST 3/4 INCH with rubber mallet or piece of wood). It fits into all Low Voltage, Electric Hoses, and Stretch Hoses. If it needs to go into a Basic Hose, it will only fit the Basic Hose with Tapered Cuff. (Note: the Reduced Tapered Cuff product is made up of the Tapered Cuff and this Metal Stub Tube.)
|
|
|
|
18-inch Plastic Wand
OUT OF STOCK - IN STOCK MID-MAY 2012 - USE 406 INSTEADConnect several of these 18-inch Plastic Wands together to dust rooms with high ceilings. Use two for hard floor brushes. Fits any perfectly round vacuum hose and/or wand.
|
|
|
|
19-inch Central Vacuum Chrome Extension Tube Wand
The 18 3/4-inch Central Vacuum Chrome Extension Tube Wand is sold individually. To obtain the correct vacuuming height, it is recommended to buy two. It's friction locking without button locks, but works fine on button lock hoses. With a diameter of 1.25 inches, this tube wand fits 99% of all central vacuum accessories, attachments and hoses.
|
|
|
|
Telescopic Ratchet Wand - Friction Lock Top and Bottom
The Telescope Ratchet Wand is a great addition to any air-driven non-electric power brush or accessory. It is friction locking, and has no button locks. Measurement: 25" collapsed and 38-1/2" fully extended. Telescopes in 3/4" intervals so it can be stopped at any height most comfortable for using.
|
|
|
|
Telescopic Wand - Button Lock Top - Friction Bottom
The Telescope Wand is a great addition to any air-driven non-electric power brush system. It has friction locking at the bottom and a button lock hole at the top.
Extended Length Measurement: 38 1/2-inch
|
|
|
|
30ft Deluxe TurboCat Central Vacuum Kit
Features the top-of-the-line air-driven TurboCat brush (aka TurboCat II, TurboCat Plus, TL2000, Ultra T210, TP210). The kit includes the easy-to-use Low Voltage Hose with an on/off power switch and helpful accessories. Kit is compatible with all central vacuums (1.5 inch diameter wall inlet holes) and is also available with longer hoses.
Deluxe Kit Includes:
- TurboCat 13" Turbine Head
- Low Voltage On/Off Hose (360 swivel, lightweight, crushproof, largest diameter for most suction)
- 12" Wheeled Floor Brush
- 6" Upholstery Tool w/Attaching Brush
- Dusting Brush
- Crevice Tool
|
- Metal Telescopic Wand
- Wire Hose Hanger
- Mesh Tool Bag
- Premium Kit also includes RugRat Mini Hand Turbine, Wall Wand Clamp, two Extension Wands, and upgrades to the Axis Floor Brush and Deluxe Dusting Brush.
|
|
|
|
|
Wire Hose Hanger
Wall mounted, holds the hose and tool caddy. Does not come with hardware.
|
|
REVIEWS
MD Vac's are Designed & Assembled in the USA.
See All Questions and Answers
