Electric Inlet Valve Covers for Central Vacuums
Electric Inlet Valve Reference Sheet
Electric Inlet Valve
Reference Sheet
All inlet valve covers on this page have dual voltage. A hook up for the low voltage wire that controls the suction and a hook up for 110 volts to run the power brush (as needed). Each valve here can receive an electric hose or any other hose on the market such as Low Voltage, Stretch, etc., but only the direct connect electric hose will mate with the two electrical contacts. If you do not need valves a 110 volt connection click here for Basic Valves. There are two types of electric valves below - the SuperValve and ElectraValve. The SuperValves have two door styles that are interchangeable. Super Valve has a short 110 volt connection already in place on the back of the cover. View the most recent SuperValve improvements. Electra Valve has a molded end on a long romex line that snaps into the cover. Watch VideoThey are not interchangeable as replacements but both can be used for new construction and existing installations.

More information on SuperValve Electric Inlets as well as ElectraValves can be found by reading the pdf located to the right. This informational pdf includes information on all SuperValves and ElectraValves sold by MD. It's perfect for choosing the best electric inlets to put into your home.

Learn about all the different types of inlets here.
SuperValve Inlet Cover Kit FullFace
SuperValve Inlet Cover Kit, Full Face
Universal Super Valve has connections for both low voltage wire (starts the power unit for suction) and high voltage wire (runs the electric power brush). Includes: rough-in mounting plate with J-box, and faceplate (not sold separately). Made by Hayden. Outer dimensions: 3-1/8" by 4-7/8". If you need a case of these inlets enter 10. Manufacturer's markings: HAYDEN MFG INLET VALVE ASSEMBLY #2050 SUPER-HOSE.




$26.80 Part #663HA
QTY
In Stock
 
Bookmark and Share
SuperValve Inlet Cover Kit Square Door
SuperValve Inlet Cover Kit, Square Door
Universal Super Valve has connections for both low voltage wire (starts the power unit for suction) and high voltage wire (runs the electric power brush). Includes: rough-in mounting plate with J-box, and faceplate (not sold separately). Made by Hayden. Outer dimensions: 3-1/8" by 4-7/8". If you need a case of these inlets enter 10. Manufacturer's markings: HAYDEN MFG INLET VALVE ASSEMBLY #1750 SUPER-HOSE.





$23.00 Part #662HA
QTY
In Stock
 
Bookmark and Share
Central Vacuum Inlet Trim Cover
Central Vacuum Inlet Trim Cover
Want a clean, fresh looking wall? When you replace the inlet valve add this trim cover behind it. It will cover a bit more of the wall and the uneven paint that was right up against the old cover. Also great for covering mistakes.
Dimensions: 4-1/8" by 5-7/8". Inner ridge that inlet sits in: 3-1/8" by 4-7/8".
Fits inlet valves with an "H" in the product number.




$2.00 Part #651HTA
QTY
In Stock
 
Bookmark and Share
ElectraValve Inlet Cover
ElectraValve Inlet Cover
Colored PVC inlet valve made exclusively to fit the ElectraValve rough-in parts above. If you need a case of these enter 32. Outer Dimension: 3 1/2" by 5 3/16".






$12.90 Part #663CA
QTY
In Stock
 
Bookmark and Share
Central Vacuum Inlet Trim Cover, Canplas VacuValve
Central Vacuum Inlet Trim Cover, Canplas VacuValve
Want a clean, fresh looking wall? When you replace the inlet valve add this trim cover behind it. It will cover a bit more of the wall and the uneven paint that was right up against the old cover. Also great for covering mistakes.
Dimensions: 4-1/2" by 6-3/16". Inner ridge that inlet sits in: 3-1/2" by 5-3/16". Thickness is 3/8".
Fits inlet valves with a "C" in the product number.





$2.50 Part #653CTA
QTY
In Stock
 
Bookmark and Share
ElectraValve rough-in, 12-gauge 14ft romex
ElectraValve rough-in, 12-gauge 14ft romex
Electra-valve rough-in kit includes: back-up mounting plate, 12-gauge 14-foot romex cable with snap-in plug, and plaster guard. Commonly used for electrical vacuum inlets. Does not include the finish plate. Use the same gauge wire that is currently in the home.

$49.75 Part #526L
QTY
In Stock
 
Bookmark and Share
ElectraValve rough-in,12ga 6ft romex
ElectraValve rough-in,12ga 6ft romex
Electra-valve rough-in kit includes: back-up mounting plate, 12-gauge 6-foot romex cable with snap-in plug, and plaster guard. Commonly used for electrical vacuum inlets. Does not include the finish plate. Use the same gauge wire that is currently in the home.
$29.75 Part #526
QTY
In Stock
 
Bookmark and Share
ElectraValve rough-in, 14-gauge 14ft romex
ElectraValve rough-in, 14-gauge 14ft romex
Electra-valve rough-in kit includes: back-up mounting plate, 14-gauge 14-foot romex cable with snap-in plug, and plaster guard. Commonly used for electrical vacuum inlets. Does not include the finish plate. Use the same gauge wire that is currently in the home.

$44.75 Part #525L
QTY
In Stock
 
Bookmark and Share
ElectraValve rough-in,14ga 6ft romex
ElectraValve rough-in,14ga 6ft romex
Electra-valve rough-in kit includes: back-up mounting plate, 14-gauge 6-foot romex cable with snap-in plug, and plaster guard. Commonly used for electrical vacuum inlets. Does not include the finish plate. Use the same gauge wire that is currently in the home.
$26.25 Part #525
QTY
In Stock
 
Bookmark and Share