|
14in Ace Electric Brush
Excellent value electric beater brush for carpets. Features overload reset, foot release, height adjustments, light, and good edge cleaning. REQUIRES electric hose and foot activated quick release wand system. Interchangeable with all Hayden Super-Vacs, Nutone CT650 & CT600, all CT20DXQD, CT18DXQD, CT16DX, CT14DX, and most Sears PowerMate central vacuums and canisters. Fits these style lower wands #406HS, #406HSP. Please check for compatibility.
|
|
 |
|
Agitator Unit (Roller Brush) for Ace Elect. Brush
|
|
|
|
Light Bulb for Ace Electric Brush
|
|
|
|
Cord for Ace Electric Brush
|
|
|
|
Pedal Quick Release for Ace Electric Brush
|
|
|
|
Screw for Ace Electric Brush
SOLD INDIVIDUALLY
|
|
|
|
Swivel for Ace Electric Brush
|
|
|
|
Swivel Seal for Ace Electric Brush
SOLD INDIVIDUALLY
|
|
|
|
Poly V-Belt for Electric Brush
Poly V-Belt Style Belt fits Ace, Quietdrive (CT20, all models), Panasonic, and Kenmore Whisper-Belt.
|
|
|
|
Indicator Block Assembly for Ace Electric Brush
|
|
|
|
Motor for Ace Electric Brush
|
|
|
|
Motor Gasket for Ace Electric Brush
|
|
|
|
Wheel for Ace Electric Brush
|
|
|
|
Overload Protector for Ace Electric Brush
|
|
|
|
Lifter for Ace Electric Brush
|
|
|
|
Handle Release Pedal for Ace Electric Brush
|
|
|
|
Motor Spring for Ace Electric Brush
|
|
|
|
Lower Plate for Ace Electric Brush
|
|
|
|
8ft Cord for Electric Hose (cuff and plug cord)
This is a hose conversion kit and replacement kit. Replaces the two prong direct connect assembly or an existing broken cord assembly on electric hoses with an electrical cord on the wall end. Includes a cuff, cord (with molded-in fuse), one male pin connection, one female slate connection (older hoses have two male pins and will need to be converted using the female slate connection - splice it into one of the wires from the hose under the cuff), and instructions.
|
|
|
|
Fuse Plug for Electrical Hose (cuff and 2-pin plug)
This is a hose conversion kit and replacement kit. Replaces the pigtail cord assembly or an existing broken assembly on electric hoses with an electrical 2-pin direct connection on the wall end. Include cuff, one 2-pin plug (with molded-in fuse) with one male pin connection (to connect to the yellow hose wire) and one female slate connection (to connect to the white hose wire), instructions and tiny slat to convert the white wire from pin to slat (older hoses have two male pins instead of the modern one pin, one slate configuration).
|
|
|
|
Gas Pump Handle for Vacuum Hose
Replaces the handle and short metal tube on hoses with a gas pump handle design exactly as pictured. Does not include switch or wires but requires switch that rocks left and right not forward and back. Fits all Electric Hoses on this website (except 342G and 343G), and is not compatible with Beam hoses; however, everyone can (upgrade to a better hose here.)
Downloadable Instructions 
|
|
|
|
Switch Assembly for Gas Pump Handle
Replaces the 3-way switch assembly in hose handles that look exactly like the one pictured in Part# 352GH.
|
|
|
|
Lower Wand: Hayden, Ace, PowerMate to MD Electric Hose
Connect certain vacuum nozzles to the crush proof electric hose (instead of the Hayden or PowerMate hose). Must use part# 406SU as well for a perfect, seamless fit. Replace Ace #48516. Compatible with: CT20DXQD, CT20DXQS, CT18DXQD, CT18DXQS, CT16DX, CT14DX, CT14L, CT12DXL, CT210, CT110, CPB100. (Also fits Kenmore PowerMate and some AirVac VM 454.)
Measurement: Wand is 17.25 inches long, and the cord is 29.5 inches long. The total length of the wand plus cord is 35 inches long.
|
|
|
|
Cord Channel Upper Wand
Includes button lock hole on top and button lock nipple on the bottom. A cord channel holds the electric power brush cord in place for connection to an electric vacuum hose. Fits into the lower wand (part 406SL). Size: 19 inches long, 1.25 inch inner diameter. Center of button lock and hole are 1 3/8 inch from ends (it is okay if there is a difference with what it mates to). When the cord is inserted in the top plastic channel cord holder, the distance between the top of the cord pins to the top of the metal wand is one inch (the perfect fit for all electric hoses in the shopping cart). Measurement; 18 1/2-inch. Plastic Channel measures 1 1/8-inch
|
|
REVIEWS
MD Vac's are Designed & Assembled in the USA.
