Pipe and Pipe Fittings for Your Central Vacuum

SUPPORT & SHIPPING
- Troubleshooting Guide
- Free Shipping Over $99 (USA)
- Expert Help - 800-997-2278
FREE 24-pg Booklet

with Every Order

(parts, upgrades, troubleshooting)

30-Day Satisfaction Guaranteed

We look forward to serving you.
- 25,000+ Customer Reviews
- 10,000+ Homeowner FAQs
- Since 1961, Online 1996
- Everything Stocked Under 1 Roof

Pipe and Pipe Fittings for Your Central Vacuum

We have everything you need to install a central vacuum or retrofit your old one. Two inch outer diameter thin wall PVC vacuum pipe (and fittings) are standard in 99% of installations. If you have smaller pipe, there are pipe adapters below. Use standard PVC glue for pipe and fittings.

Our Installation home page is full of links on everything you need to know about installation.

Make your own Installation Kit by using the Installation Parts Guide to quickly figure out the supplies you will need for your specific installation.

All ASTM Standard F 2158-01 compliant for industry standard central vacuum pipe and fittings.


80ft PVC Central Vac Pipe (ten 8-ft) (Ground Ship)
Part #521-10
80 ft PVC Central Vacuum Pipe. Ten 8 ft tubes. Central vacuum installation pipe is used for seamless connections with central vacuum fittings.
$88.00

40ft PVC Central Vac Pipe (ten 4-ft) (Ground Ship)
Part #520-10
40 ft PVC Central Vacuum Pipe, Ten 4-ft Tubes. Central vacuum installation pipe is used for seamless connections with central vacuum fittings.
$41.85

16ft PVC Central Vacuum Pipe  (four 4-foot tubes)
Part #520-4
16-feet of PVC Vacuum Pipe, four 4-foot tubes. Great for small central vacuum jobs such as repairs, relocating a valve, adding a valve, exhausting, etc.
$23.25

4ft PVC Central Vacuum Pipe (two 2-foot tubes)
Part #520-2
4ft PVC Central Vacuum Pipe, two 2-foot tubes. Perfect for small central vacuum jobs.
$17.20

J Pipe Hanger (case=25qty)
Part #512J
J Shaped Pipe Hanger. Used to hang 2 inch OD Central Vacuum Pipe at a distance of a foot or less. Comes with a nail. Made of sturdy PVC.
$2.55

90 Short PVC Vacuum Connector
Part #501
Use this fitting at the wall mounting plates only. Inner diameter is 2 inches and seamlessly mates with central vacuum pipe. High quality virgin PVC.
$1.35

90 Sweep PVC  Vacuum Connector
Part #502
This is the most common fitting used for installations. Inner diameter is 2 inches and seamlessly mates with central vacuum pipe. High quality virgin PVC.
$1.50

90 Spigot PVC  Vacuum Connector
Part #503
90 Spigot PVC Vacuum Connector. Spigot fittings are made to fit directly into other fittings. High quality virgin PVC.
$1.40

45 Degree PVC  Vacuum Connector
Part #504
Use 45 degree angles to reduce the amount of pipe used. Inner diameter is 2 inches and seamlessly mates with central vacuum pipe. High quality virgin PVC.
$1.35

45 Spigot  PVC  Vacuum Connector
Part #505
45 Spigot PVC Vacuum Connector. Spigots fit directly into another fitting. High quality virgin PVC.
$1.35

Coupling PVC Vacuum Connector
Part #507
Coupling PVC Vacuum Connector for connecting two pieces of pipe together. Make sure you have plenty of these for an installation. Inner diameter is 2 inches and seamlessly mates with central vacuum pipe. High quality virgin PVC.
$0.65

90 Sweep Tee PVC Vacuum 3-way Connector
Part #508
Join a branch at 90 degrees to the main line. Do not install backwards. Inner diameter is 2 inches and seamlessly mates with central vacuum pipe. High quality virgin PVC.
$1.95

45 Wye PVC Vacuum 3-way Connector
Part #509
Join a branch at 45 degrees to the main line. Do not install backwards. Inner diameter is 2 inches and seamlessly mates with central vacuum pipe. High quality virgin PVC.
$1.95

Install Kit with 3 Electric Inlets
Part #662HW3
Complete install kit for 3 electric wall plates. Includes wall plates, backing plates, low voltage wires and fittings. 110 wire not included. Made by Hayden Mfg.
$126.00

Install Kit with 1 Non-Electric Inlet
Part #652HW1
Complete install kit for 1 low voltage wall plate. Includes wall plate, backing plate, low voltage wire and fittings. Easy installation! Made by Hayden Mfg.
$34.00

Install Kit with 3 Non-Electric Inlets
Part #652HW3
Complete install kit for 3 low voltage wall plates. Includes 3 wall plates, 3 backing plates, low voltage wire and fittings. Easy installation! Made by Hayden Mfg.
$95.00

Double Wye PVC Vacuum 3-way Connector
Part #510
Double Wye PVC Vacuum 3-way Connector. Inner diameter is 2 inches and seamlessly mates with central vacuum pipe. High quality virgin PVC.
$2.35

Straight Tee PVC Vacuum 3-way Connector
Part #511
Straight Tee PVC Vacuum 3-way Connector. The Straight Tee is not recommended for any part of a central vacuum installation. Use only when necessary.
$2.25

Pipe Strap
Part #512
Pipe Strap is used mainly in existing home installations where the pipe is visible.
$0.50

3-in-1 Mounting Bracket PVC
Part #517
The 3-in-1 PVC Mounting Bracket is the most popular bracket for all Basic Inlet Valve Covers.
$5.90

Metal Mounting Bracket with Spigot
Part #515
Metal Mounting Bracket with Spigot includes attached coupling, gasket and screws. Used in new construction.
$7.00

Pipe Collar
Part #513
Pipe Collar. A cosmetic inlet facing, used in existing home installations where the pipe and low voltage wire go into the drywall.
$1.15

Exhaust Vent Door for Central Vacuum Pipe
Part #518
Central Vacuum Pipe for Exhaust Vent Door. Installed on the outside of the home to exhaust the power unit.
$6.35

PVC Plaster Guard (2 per pack)
Part #519
2-Pack PVC Plaster Guard. Useful in new construction installations to cover up the backing plate, protecting it from dry-walling and painting.
$5.00

Steel for Firewall 2 x 6 inch
Part #523S
Steel for Firewall 2 x 6 inch. For new construction when the pipe line penetrates the fire barrier wall.
$3.55

FireStop Ring by STI
Part #513FK
FireStop Ring by STI was designed specifically for the central vacuum industry.
$17.10

Fire Stop Ring
Part #513F
3M Fire Stop Ring fits over the pipe and collapses the PVC pipe and wire when heated.
$54.25

2inch ID Flexible Pipe Vacuum Hose (per/foot)
Part #340
Flex Pipe is excellent for installing VacPan automatic dustpans.
$3.90

Part #5340C
The Hose Clamp for Flex Pipe keeps your flexible pipe clamped down on the 2" OD central vacuum pipe good and tight.
$7.45

Pipe Adapter for 1.8125 inch OD pipe to 2 inch Vac
Part #507P1
Pipe Adapter for 1.8125 inch OD Pipe to 2 inch Vac. Central Vacuum Experts. 1000s of Reviews. Local Dealers.
$1.60

Pipe Adapter for 1.75 inch OD pipe to 2 inch Vac
Part #507P2
Adapter used to mate smaller vacuum pipe with 1.75 inch outer diameter to standard 2 inch vacuum pipe.
$1.60

Part #507P3
Adapter for SCH40 to Central Vac Pipe. Adapter connects 2 in ID SCH40 PVC to Central Vacuum PVC 2 in OD.
$3.65

Pipe Cap, White, PVC
Part #514
White PVC Pipe Cap. Used to terminate the end of a vacuum pipe.
$0.75

Central Vacuum Muffler
Part #260
Is your power unit too loud? Central Vacuum Muffler decreases the irritating noise. Simply attach this vacuum muffler to any central vacuum that has 2-in OD diameter exhaust ports.
$21.00

3in1 Mounting Bracket for 2x3in wall
Part #511MP
3-in-1 Mounting Bracket for 2 in x 3 in Wall. Use with the Special Short 90 for 2x3in walls when you have walls that are not as wide as standard 2x4 walls.
$2.90

Special Short 90 for 2x3in walls
Part #511SN
Special Short 90 for 2 in x 3 in Walls. Central Vacuum Experts. 1000s of Reviews. Local Dealers.
$1.75

Cyclonic Pre-Filter Separator
Part #115AM
Tank Only, No Motor, Pre-Unit-Filter Tank.
$495.80

Motor Exhaust Coupling
Part #507EX
Motor Exhaust Coupling. Wide side: inner diameter is 2 in, outer is 2-1/4 in. Narrow side: inner diameter is 1-7/8 in and outer is 2-1/8 in.
$3.55

Part #5613ARV
Air Relief Valve for Central Vacuum Systems. The Air Relief Valve stops damage to your motor caused by clogs and blockage.
$12.55

Part #500CK
The parts and and adapters you need to swap out your old central vacuum power unit for a new one from M.D. Manufacturing, Inc.
$27.55