Flo-Master Models Compared

Flo-Master 240V Unit Specifications

See 120 V Units

F450t2

F450t2
Part # F2153AH

Suction Power

3,000 sq ft Covers
Single 1-stage 5.7" thru-flow motor Motor
461 Max Air Watts
111.7 " Water Lift
120.5 CFM

Dirt Collection

Closed Bag Filtration
5 Gallon Trash Capacity

Other Features

62 dB Noise Level
5.5 Max Amps
20.0" Tall
15 lbs
3 Year Warranty

F600t2

F600t2
Part # F215EAH

Suction Power

6,000 sq ft Covers
Single 2-stage 5.7" thru-flow motor Motor
603 Max Air Watts
125.6 " Water Lift
132.2 CFM

Dirt Collection

Tru-Seal® Closed Bag System Filtration
8 Gallon Trash Capacity

Other Features

63 dB Noise Level
7.0 Max Amps
29.0" Tall
34 lbs
10 Year Warranty

F650t2

F650t2
Part # F2156AH

Suction Power

8,000 sq ft Covers
Single 2-stage 5.7" thru-flow motor Motor
654 Max Air Watts
139.7 " Water Lift
130.2 CFM

Dirt Collection

Tru-Seal® Closed Bag System Filtration
8 Gallon Trash Capacity

Other Features

64 dB Noise Level
7.4 Max Amps
29.0" Tall
34 lbs
10 Year Warranty

F700t2

F700t2
Part # F215DAH

Suction Power

10,000 sq ft Covers
Single 2-stage 5.7" thru-flow motor Motor
700 Max Air Watts
145.9 " Water Lift
133.0 CFM

Dirt Collection

Tru-Seal® Closed Bag System Filtration
8 Gallon Trash Capacity

Other Features

65 dB Noise Level
7.6 Max Amps
37.0" Tall
38 lbs
10 Year Warranty

Specifications for all Flo-Master units

  • Resettable Minibreaker Protection
  • 18 & 20 Gauge Steel Construction
  • Powder Coat Surface finish
  • Filtered Exhaust
  • Includes Dual intake valves
  • Includes Utility valve

Flo-Master Warranty

M.D. Manufacturing, Inc. warrants its Flo-Master power units against electrical component failure for a period of ten (10) years. This warranty is transferable with the unit and is not solely limited to the original owner. Any parts (excluding filters) required within the first ten years will be furnished free of charge by the Authorized Dealer from whom the power unit was originally purchased. Model F450f is warranted for three (3) years. In addition, all Flo-Master units are guaranteed for life against defects in materials and workmanship.

If an Authorized Dealer is not nearby, M.D. Manufacturing, Inc. will honor and perform required warranty services. The end user must return the unit to the factory freight pre-paid. This warranty does not apply to applications outside of North America, commercial applications, misuse, abuse, acts of God, operating without the filters, or units tampered with by unauthorized personnel.


Exterior Venting: Venting is optional, however venting is required for confined locations.

Air Relief Valve: The air relief valve installed on the side of the unit should be kept clear of objects to let air into the vacuum and must not be removed.

* Square foot coverage of the central vacuum should be based on factors including altitude, hours of use, complexity of pipe installation, length of furthest vacuum inlet, noise level desired, type and size of filtration, installation materials, and budget. The square footage recommendation on this page can be higher or lower when taking these factors into consideration.