Installation Materials for Central Vacuum Systems

Installation Tools & Wire for Your Central Vacuum

Low voltage 20-gauge multi-thread separated-insulation wire for adding an additional central vacuum inlet or just to finish off a job. Available in varying lengths.

$4.82 - $68.40

Pipe Deburring Tool

Pipe Deburring Tool smoothes the end of the pipe from any burrs.

$46.83

Clean Cut Blade (5-Pack)

5-Pack Clean Cut Cutter Blade. Replacement blades for the Clean Cut Pipe Cutter.

$14.59

Wheeler PVC Pipe Cutter

The Wheeler PVC Pipe Cutter is cleanest and most convenient way to cut PVC pipe! Use the detachable deburrer tool to smooth the edge and remove any spurs.

$135.23

Wheeler PVC Pipe Cutter Replacement Blade

Wheeler PVC Pipe Cutter Replacement Blade. Blades sold individually.

$11.75

Slip-over Pipe Cutter

Slip the cutter over the pipe and spin to cut. This cutter is a Hayden Pipe Cutter and has "CANADA" labeled on it. Includes one blade.

$110.90

BLADES ONLY for Slip Over Pipe Cutter

$36.90

PVC Wire Ties 100 count

The low voltage wire that is run along the pipe should be anchored to the pipe every 4 feet and at every joint with these wire ties.

$14.00

Self Feed Drill Bit

Standard size, 2-9/16 inch bit is used with a powerful hole hog drill to create holes for the pipe runs.

$77.77

Nail-on Safety Plates (sold in boxes of 100)

Nail-on Safety Plates are sold in boxes of 100 and are 1-1/2 in x 5 in. Use them to protect screws and nails from penetrating into the pipe.

$41.89

Vacuum Waterlift Gauge 160

The Vacuum Waterlift Gauge 160 measures the sealed suction or waterlift when put on an opening of up to 2.25-inches.

$92.43

FireStop Ring by STI

FireStop Ring by STI was designed specifically for the central vacuum industry.

$24.85

Pipe and Pipe Fittings for Your Central Vacuum

80ft PVC Central Vac Pipe (ten 8' tubes)

80ft PVC Central Vacuum Pipe. Ten 8' tubes

$99.95

40ft PVC Central Vac Pipe (ten 4-ft) (Ground Ship)

40ft PVC Central Vac Pipe (ten 4ft tubes)

40 ft PVC Central Vacuum Pipe, Ten 4-ft Tubes. Central vacuum installation pipe is used for seamless connections with central vacuum fittings.

$47.95

16ft PVC Central Vacuum Pipe (four 4-foot tubes)

16ft PVC Central Vacuum Pipe (four 4 ft tubes)

16-feet of PVC Vacuum Pipe, four 4-foot tubes. Great for small central vacuum jobs such as repairs, relocating a valve, adding a valve, exhausting, etc.

$26.15

4ft PVC Central Vacuum Pipe (two 2-foot tubes)

4ft PVC Central Vacuum Pipe, two 2-foot tubes. Perfect for small central vacuum jobs.

$15.57

J Shaped Pipe Hanger

J Shaped Pipe Hanger. Used to hang 2 inch OD Central Vacuum Pipe at a distance of a foot or less. Comes with a nail. Made of sturdy PVC.

$2.90

90 Short PVC Vacuum Connector

Use this fitting at the wall mounting plates only. Inner diameter is 2 inches and seamlessly mates with central vacuum pipe. High quality virgin PVC.

105

$1.40

90 Sweep PVC Vacuum Connector

This is the most common fitting used for installations. Inner diameter is 2 inches and seamlessly mates with central vacuum pipe. High quality virgin PVC.

112

$1.57

90 Spigot PVC Vacuum Connector

90 Spigot PVC Vacuum Connector. Spigot fittings are made to fit directly into other fittings. High quality virgin PVC.

$1.74

45 Degree PVC Vacuum Connector

Use 45 degree angles to reduce the amount of pipe used. Inner diameter is 2 inches and seamlessly mates with central vacuum pipe. High quality virgin PVC.

$1.54

45 Spigot PVC Vacuum Connector

45 Spigot PVC Vacuum Connector. Spigots fit directly into another fitting. High quality virgin PVC.

$1.12

Coupling PVC Vacuum Connector

Coupling PVC Vacuum Connector for connecting two pieces of pipe together. Make sure you have plenty of these for an installation. Inner diameter is 2 inches and seamlessly mates with central vacuum pipe. High quality virgin PVC.

126

$0.72

90 Sweep Tee PVC Vacuum 3-way Connector

Join a branch at 90 degrees to the main line. Do not install backwards. Inner diameter is 2 inches and seamlessly mates with central vacuum pipe. High quality virgin PVC.

$2.13

45 Wye PVC Vacuum 3-way Connector

Join a branch at 45 degrees to the main line. Do not install backwards. Inner diameter is 2 inches and seamlessly mates with central vacuum pipe. High quality virgin PVC.

$2.63

Medium 90 Spigot Ell

High quality PVC Spigot for built-in vacuum Installations. The Medium Spigot has one male and one female end.

$2.15

Medium 90 Sweep Ell

High quality fittings for Central Vacuum Installations. Both ends are female. Our recommendation is to always use as wide of a turn elbow as possible to eliminate any potential for clogs.

$2.40

Install Kit with 3 Electric Inlets

Complete install kit for 3 electric wall plates. Includes wall plates, backing plates, low voltage wires and fittings. 110 wire not included. Made by Hayden Mfg.

$141.95

Install Kit with 1 Non-Electric Inlet

Complete install kit for 1 low voltage wall plate. Includes wall plate, backing plate, low voltage wire and fittings. Easy installation! Made by Hayden Mfg.

$51.95

Install Kit with 3 Non-Electric Inlets

Complete install kit for 3 low voltage wall plates. Includes 3 wall plates, 3 backing plates, low voltage wire and fittings. Easy installation! Made by Hayden Mfg.

$115.95

Double Wye PVC Vacuum 3-way Connector

Double Wye PVC Vacuum 3-way Connector. Inner diameter is 2 inches and seamlessly mates with central vacuum pipe. High quality virgin PVC.

$3.42

Straight Tee PVC Vacuum 3-way Connector

Straight Tee PVC Vacuum 3-way Connector. The Straight Tee is not recommended for any part of a central vacuum installation. Use only when necessary.

$3.14

Pipe Strap

Pipe Strap is used mainly in existing home installations where the pipe is visible.

$0.56

3-in-1 Mounting Bracket PVC

The 3-in-1 PVC Mounting Bracket is the most popular bracket for all Basic Inlet Valve Covers.

$6.45

Metal Mounting Bracket with Spigot

Metal Mounting Bracket with Spigot includes attached coupling, gasket and screws. Used in new construction.

$8.60

Pipe Collar

Pipe Collar. A cosmetic inlet facing, used in existing home installations where the pipe and low voltage wire go into the drywall.

$1.70

Exhaust Vent Door for Central Vacuum Pipe

Central Vacuum Pipe for Exhaust Vent Door. Installed on the outside of the home to exhaust the power unit.

$7.35

PVC Plaster Guard (2 per pack)

2-Pack PVC Plaster Guard. Useful in new construction installations to cover up the backing plate, protecting it from dry-walling and painting.

$7.37

Steel for Firewall 2 x 6 inch

Steel for Firewall 2 x 6 inch. For new construction when the pipe line penetrates the fire barrier wall.

$9.16

FireStop Ring by STI

FireStop Ring by STI was designed specifically for the central vacuum industry.

$24.85

Flexible Pipe

Flex Pipe is excellent for installing VacPan automatic dustpans.

$5.23

Hose Clamp for Flex Pipe

The Hose Clamp for Flex Pipe keeps your flexible pipe clamped down on the 2" OD central vacuum pipe good and tight.

$5.95

Pipe Adapter and Hide-A-Hose Stop

Pipe Adapter for 1.8125 inch OD Pipe to 2 inch Vac. Central Vacuum Experts. 1000s of Reviews. Local Dealers.

$1.90

Pipe Adapter for 1.75 inch OD pipe to 2 inch Vac

Adapter used to mate smaller vacuum pipe with 1.75 inch outer diameter to standard 2 inch vacuum pipe.

$1.79

Adapter - SCH40 to Central Vac Pipe

Adapter for SCH40 to Central Vac Pipe. Adapter connects 2 in ID SCH40 PVC to Central Vacuum PVC 2 in OD.

$6.77

Pipe Cap, White, PVC

White PVC Pipe Cap. Used to terminate the end of a vacuum pipe.

$1.29

Muffler for vacuum fits 2-inch OD exhaust ports

Is your power unit too loud? Central Vacuum Muffler decreases the irritating noise. Simply attach this vacuum muffler to any central vacuum that has 2-in OD diameter exhaust ports.

$19.40

3in1 Mounting Bracket for 2x3in wall

3-in-1 Mounting Bracket for 2 in x 3 in Wall. Use with the Special Short 90 for 2x3in walls when you have walls that are not as wide as standard 2x4 walls.

$3.10

Special Short 90 for 2x3in walls

Special Short 90 for 2 in x 3 in Walls. Central Vacuum Experts. 1000s of Reviews. Local Dealers.

$1.29

Cyclonic Pre-Filter Separator

Tank Only, No Motor, Pre-Unit-Filter Tank.

$757.95

Motor Exhaust Coupling

Motor Exhaust Coupling. Wide side: inner diameter is 2 in, outer is 2-1/4 in. Narrow side: inner diameter is 1-7/8 in and outer is 2-1/8 in.

$3.20

Air Relief Valve for Central Vacuum Systems

Air Relief Valve for Central Vacuum Systems. The Air Relief Valve stops damage to your motor caused by clogs and blockage.

$19.61

Unit Install Kit

The parts and and adapters you need to swap out your old central vacuum power unit for a new one from M.D. Manufacturing, Inc.

$34.15

Installation Supplies and Resources for Your Central Vacuum