Hide-a-Hose HS4000 Series Valve Trim Kit
Hide-A-Hose Wall Inlet Valve Kit includes hose box, door, two wire nuts, and four screws to attach to backing plate. Available in white or almond (black not available).
This is HAH's previous inlet style called the Hide-A-Hose HS4000 Series. It replaces discontinued HS3000 series without any modifications to the original HAH system or backing plate.
To remove the wall valve: 1) remove the hose completely by pulling the hose end straight down and out of the valve, 2) remove the four screws in the corners, 3) with the lid open push the interior of the valve down about 1/2 inch, 4) tilt the valve out from the wall at bottom and pull the valve out, and 5) assuming the installer left slack, disconnect the red lever switch wires. To put a new valve follow the same steps in reverse order.
Stay up to date on the latest products and tips/tricks for your central vac.
Subscribe to our newsletter today!