MD Central Vacuum
Fast Free shipping
on orders over $75
Since 1961

Inlets & Installation for Hayden Central Vacuum

How to Replace an Inlet Valve

Most inlets are universal, meaning they have two screws four inches apart and a 1-1/2 inch diameter hole. Hayden vacuum inlet ports are usually all universal. Vacuum inlets come in a variety of colors and shapes and are usually interchangeable. Replacing inlets is not difficult and the video is a tutorial to help. Take a moment to determine if your inlets are Basic or Electric. Both universal inlet types have two metal contacts INSIDE the 1-1/2 inch diameter hole. When these two contacts INSIDE THE HOLE are touched with the back of a spoon and shorted the suction starts. Electric inlets have these contacts as well as two small 110 volt connection holes 3/8 inch apart at the top or bottom of the main hole - DO NOT PUT ANYTHING into these small holes.

Click here to jump to installation supplies for Hayden central vacuum system.

Basic Inlets
Basic Inlets

replace 99% of all outlets

Electric Inlets
Electric Inlets

super valve or electra valve

Baseboard/VacPan
Baseboard/VacPan

sweep dirt into the system

Pipe and Installation
Pipe and Installation

parts to install/retrofit a vac

Basic Inlets for your Hayden Central Vacuum

Basic inlet plate covers are used in many Hayden installations and replace 98% of all outlets. The opening is just under 1-1/2 inches, mounting screws are 4 inches apart, and the inlet fits into a 1-5/8 inch round hole in the mounting bracket. Each inlet valve can be mounted with the lid opening up or down. Note the FULL FACE inlets are the MOST DURABLE and replace oval and square styles.

All rectangle shaped valves are interchangeable. There are two metal contact points inside the hole of each inlet valve and two screws on the back side for the low voltage wire connection.

Replace 99% of older wall inlets with any of these rectangle valves. Note: these do not replace inlets activated by pressing copper or a button, or that have a 1-1/4 inch hose insertion hole.

EASY Upgrade for Hayden: Consider a Low Voltage Hose to get the convenience of turning the vacuum on and off at the hose handle instead of running back to pull the hose out from the wall. All Low Voltage Hoses work with all inlets and vacuum systems. If your hose already has a handle switch you are set and it will work with these valves!


Central Vacuum Inlet, Oval Door, PVC
Basic, Oval Door Central Vacuum Inlet contains low voltage connections only. Replaces Hayden 1500. Available in White or Almond.
$8.75

Central Vacuum Inlet, Square Door, PVC
Basic, Square Door Central Vacuum Inlet contains low voltage connections only. Replaces Hayden 1700. Available in White or Almond.
$9.75

Central Vacuum Inlet, Full Face, PVC
Full-Face Basic Central Vacuum Inlet contains low voltage connections only. Replaces Hayden 2000. Available in White or Almond.
$11.49

Central Vacuum Inlet Trim Cover
Vacuum Wall Inlet Trim Plate covers up any mess around the inlet. Fits inlets by Hayden (Outer 4-1/8
$3.75

Central Vacuum Inlet, Canplas VacuValve, PVC
VacuValve inlet contains low voltage connections. Replace existing inlets easily! Canplas VacuValve 5590, 5595. Available in White, Almond, or Black.
$11.49

Central Vacuum Inlet, Oval, METAL
Oval Metal Central Vacuum Inlet available in Bronze, Chrome, Satin Brass, and White contains low voltage connections only. Watch the Inlet Replacement Video.
$21.50 - $40.50

3-in-1 Mounting Bracket PVC
The 3-in-1 PVC Mounting Bracket is the most popular bracket for all Basic Inlet Valve Covers.
$6.45

Electrified Inlets for your Hayden Central Vacuum
Electric Inlet Valve Reference Sheet
Electric Inlet Valve Reference Sheet

It is recommended an electrician works with electric valves.

The following electric inlet plate covers can be used and may have been used in any installation for any brand including Hayden. The round opening is just under 1-1/2 inch, mounting screws are just under 4 inches apart, and the plate fits into a 1-5/8 inch diameter hole in the mounting bracket in the wall. Any vacuum wall cover plate with two small holes (3/8 inch apart!!) can be replaced with one of the two following electric inlet types. Any of these valves can be used for new installations and retrofits as well.

Electric inlet valve covers have two voltage connections. One for low voltage wires (two screws on the backside) and one for 110 volts (on the front side of the cover). Electric valves can also receive other types of hoses including Stretch, Low Voltage, and Basic.

There are two types of electric inlets and they are not interchangeable.
Super Valve Electric Covers have a permanent 110 volt connection plug with wire leads.
Electra Valve Electric Covers hold a molded plug that is attached to 110 volt romex wire.


Super-Valve Inlet Cover Kit FullFace
Full Face Electric Super Valve Inlet Cover Kit. Be sure to watch the video on how to replace valves. Hayden Mfg Assembly #2050. Available in White, Ivory, and Almond.
$30.50

SuperValve Inlet Cover Kit Square Door
Square Door Electric Super Valve Inlet Cover Kit. Be sure to watch the video on how to replace valves. Hayden Mfg Assembly #1750.
$25.94

ElectraValve rough-in, 12-gauge 14ft romex
Newest Model! Full-face, side-opening Super Valve Inlet Cover Kit. Be sure to watch the video on how to replace valves. Replaces #2050 Full-Face SuperValve.
$30.50

Central Vacuum Inlet Trim Cover
Vacuum Wall Inlet Trim Plate covers up any mess around the inlet. Fits inlets by Hayden (Outer 4-1/8
$3.75

The E-box ElectraValve is the new ElectraValve from Vaculine-Canplas and is not compatible with older ElectraValves which are now out of production. Made by Vaculine/Canplas 775850. Available in Almond or White.
$40.75 - $41.60

Inlet Valve Extension
Use as many of these as needed when the wall is too thick, causing the mounting plate in the wall and wall plate not to meet. Each extension adds 3/4 of an inch and can be cut to shorter sizes.
$2.05

Central Vacuum Inlet Trim Cover, Canplas VacuValve
Trim plates hide imperfections on the wall surrounding your new inlets. Fits VacuValve inlets. Available in White, Ivory, Almond, or Black.
$6.70

Toe Kick / VacPan Inlets for your Hayden Central Vacuum
Central Vacuum Vac Pan, Toe Kick
Central Vacuum VacPan, Toe Kick Baseboard Inlet. Available in white, almond, and black.
$36.78

Central Vacuum VacPort
Toe-kick activated central vacuum VacPort inlet with LED lighting and unbreakable polycarbonate.
$46.90

Canplas CanSweep
The new CanSweep brings a modern design with textured appearance and zero loss of suction.
$38.25

Trim Faceplate for VacPan
Trim plate for VacPan base-board toe kick. Available in white, almond, black, and stainless steel.
$5.07 - $14.50

Canplas CanSweep Trimplate
Canplas CanSweep Trimplate. A trim plate is used to hide imperfections on the wall around the CanSweep.
$9.75

Vac Pan Repair Kit
Repair a broken VacPan lever arm with the VacPan repair Kit. Includes lever arm, gasket assembly, and assembly hardware.
$17.69

2inch ID Flexible Pipe Vacuum Hose (per/foot)
Flex Pipe is excellent for installing VacPan automatic dustpans.
$5.00

The Hose Clamp for Flex Pipe keeps your flexible pipe clamped down on the 2" OD central vacuum pipe good and tight.
$4.65

90 Short PVC Vacuum Connector
Use this fitting at the wall mounting plates only. Inner diameter is 2 inches and seamlessly mates with central vacuum pipe. High quality virgin PVC.
$1.60

4ft PVC Central Vacuum Pipe (two 2-foot tubes)
4ft PVC Central Vacuum Pipe, two 2-foot tubes. Perfect for small central vacuum jobs.
$14.30

Pipe and Installation Parts for your Hayden Central Vacuum

We have everything you need to install a central vacuum or retrofit your old one. Two inch outer diameter thin wall PVC vacuum pipe (and fittings) are standard in 99% of installations. If you have smaller pipe, there are pipe adapters below. Use standard PVC glue for pipe and fittings.

Our Installation home page is full of links on everything you need to know about installation.

Make your own Installation Kit by using the Installation Parts Guide to quickly figure out the supplies you will need for your specific installation.

All ASTM Standard F 2158-01 compliant for industry standard central vacuum pipe and fittings.


77.5 ft PVC Central Vac Pipe (ten 7'-9
77.5ft PVC Central Vacuum Pipe. Ten 7'-9"-ft tubes. Central vacuum installation pipe is used for seamless connections with central vacuum fittings.
$90.65

40ft PVC Central Vac Pipe (ten 4-ft) (Ground Ship)
40 ft PVC Central Vacuum Pipe, Ten 4-ft Tubes. Central vacuum installation pipe is used for seamless connections with central vacuum fittings.
$43.15

16ft PVC Central Vacuum Pipe  (four 4-foot tubes)
16-feet of PVC Vacuum Pipe, four 4-foot tubes. Great for small central vacuum jobs such as repairs, relocating a valve, adding a valve, exhausting, etc.
$24.00

4ft PVC Central Vacuum Pipe (two 2-foot tubes)
4ft PVC Central Vacuum Pipe, two 2-foot tubes. Perfect for small central vacuum jobs.
$14.30

90 Sweep PVC  Vacuum Connector
This is the most common fitting used for installations. Inner diameter is 2 inches and seamlessly mates with central vacuum pipe. High quality virgin PVC.
$1.60

90 Short PVC Vacuum Connector
Use this fitting at the wall mounting plates only. Inner diameter is 2 inches and seamlessly mates with central vacuum pipe. High quality virgin PVC.
$1.60

45 Degree PVC  Vacuum Connector
Use 45 degree angles to reduce the amount of pipe used. Inner diameter is 2 inches and seamlessly mates with central vacuum pipe. High quality virgin PVC.
$1.35

Coupling PVC Vacuum Connector
Coupling PVC Vacuum Connector for connecting two pieces of pipe together. Make sure you have plenty of these for an installation. Inner diameter is 2 inches and seamlessly mates with central vacuum pipe. High quality virgin PVC.
$0.65

90 Sweep Tee PVC Vacuum 3-way Connector
Join a branch at 90 degrees to the main line. Do not install backwards. Inner diameter is 2 inches and seamlessly mates with central vacuum pipe. High quality virgin PVC.
$2.06

45 Wye PVC Vacuum 3-way Connector
Join a branch at 45 degrees to the main line. Do not install backwards. Inner diameter is 2 inches and seamlessly mates with central vacuum pipe. High quality virgin PVC.
$1.95

Install Kit with 1 Non-Electric Inlet
Complete install kit for 1 low voltage wall plate. Includes wall plate, backing plate, low voltage wire and fittings. Easy installation! Made by Hayden Mfg.
$38.85

Pipe Strap
Pipe Strap is used mainly in existing home installations where the pipe is visible.
$0.50

3-in-1 Mounting Bracket PVC
The 3-in-1 PVC Mounting Bracket is the most popular bracket for all Basic Inlet Valve Covers.
$6.45

20-gauge Low Voltage Wire
Low voltage 20-gauge multi-thread separated-insulation wire for adding an additional central vacuum inlet or just to finish off a job. Available in varying lengths.
$3.30 - $45.30

Pipe Collar
Pipe Collar. A cosmetic inlet facing, used in existing home installations where the pipe and low voltage wire go into the drywall.
$1.55

Exhaust Vent Door for Central Vacuum Pipe
Central Vacuum Pipe for Exhaust Vent Door. Installed on the outside of the home to exhaust the power unit.
$7.65

Steel for Firewall 2 x 6 inch
Steel for Firewall 2 x 6 inch. For new construction when the pipe line penetrates the fire barrier wall.
$4.25

2inch ID Flexible Pipe Vacuum Hose (per/foot)
Flex Pipe is excellent for installing VacPan automatic dustpans.
$5.00

The parts and and adapters you need to swap out your old central vacuum power unit for a new one from M.D. Manufacturing, Inc.
$28.00

Complete installation tools can be found here.


*Note: Hayden Vacuum is a registered trademark of Canplas, not M.D. Manufacturing, Inc. Products sold by M.D. Manufacturing, Inc. are not from Hayden Vacuum but are designed to complement a Hayden Central Vacuum. Therefore, parts and products carry warranties from MD Manufacturing and not Hayden Vacuum and thus may alter the warranty provided by Hayden Vacuum.