Our brand new (not rebuilt) lamb 117507 motor is a work-horse! The 117507 motor is a Lamb Ametek original motor.
What to note:
- Fan Stages - 3
- Bottom Diameter - 7.2"
- Voltage - 110-120
- Hertz - 50-60
- Height - 8.5"
- Bolt Height - 2.5"
- Waterlift - 134.1"
- CFM - 94
- AirWatts - 406
- Amps - 12.5
The lamb 117507 Ametek vacuum motor may say 7507 or 11-7507.
What motors it replaces: 747012 and 117470 motors.
When to replace:
The signs that a 117507 lamb motor needs to be replaced include: mini breaker popping, electrical smell, excessive blue sparks seen from motor top, you only hear a click, motor shuts down on its own but works later, or its life of 900-1,200 hours has been used up. (If you don't hear a click, then your relay most likely needs to be replaced and your motor may be fine). Five percent of the time, the mini breaker will go bad as well as the motor. If this happens, replace the motor and then evaluate the mini breaker.
How to replace: It is not difficult to replace the 117507 Ametek lamb motor. There are three bolts and a couple of wires. All of our customers are amazed at how easy it is. NOTE: There is no core trade-in. Used motors are thrown away or taken to a metal recycling center. Click here to read and print out our step-by-step motor replacement instructions.
Replacing motor brushes:
The 117507 lamb vacuum motor has carbon motor brushes that can be replaced. This should be done before a motor is "on its last legs." Read more about changing the motor brush on the detailed motor brush how-to page
. If you are ready to replace your motor brushes, here is a link to the 117507 motor brush
. You will need to buy two.