MD Central Vacuum Since 1961 Fast Free shipping
on orders over $75 ⓘ
Call 1-800-997-2278 Dealer My Order Cart

119412 Lamb Vacuum Motor PLUS Free Wire Set


119412 Motor for Vacuums and Blowers

Product Details

119412 Lamb Vacuum Motor PLUS Free Wire Set
Our brand new (not rebuilt) lamb 119412 motor is a very common motor in many central vacuum brands and models. 119412 motor is a Lamb Ametek original motor.

Specifications:
  • Fan Stages - 2
  • Bottom Diameter - 5.7"
  • Voltage - 110-120
  • Hertz - 50-60
  • Height - 6.5"
  • Bolt Height - 2"
  • Waterlift - 81.8"
  • CFM - 97
  • AirWatts - 250
  • Amps - 7.5
What to note: If you want a stronger motor that will fit in its place, order the 116472. It will draw three more amps though (just under 11 amps total) so be sure you are on a 15 amp circuit for a single 116472 motor or 30 amp circuit for two of them. The 116472 is just a bit taller as well. The 119412 lamb motor also includes a wire set with spades to connect to motor. We recommend splicing the other end to old wire using wire nuts.

What motors it replaces: 115894, 116116, 116210-50, 116392, and 116207 motors.

When to replace: The signs that a lamb 119412 motor needs to be replaced include: mini breaker popping, electrical smell, excessive blue sparks seen from motor top, you only hear a click, motor shuts down on its own but works later, or its life of 900-1,200 hours has been used up. (If you don't hear a click, then your relay most likely needs to be replaced and your motor may be fine). Five percent of the time, the minibreaker will go bad as well as the motor. If this happens, replace the motor and then evaluate the mini breaker.

How to replace: It is not difficult to replace the 119412 ametek motor. There are three bolts and a couple of wires. All of our customers are amazed at how easy it is. NOTE: There is no core trade-in. Used motors are thrown away. Click here to read and print out our step-by-step motor replacement instructions.

Replacing motor brushes: The lamb 119412 ametek vacuum motor has carbon motor brushes that can be replaced. This should be done before a motor is "on its last legs." Read more about changing the motor brush on the detailed motor brush how-to page. If you are ready to replace your motor brushes, here is a link to the 119412 motor brush. You will need to buy two.

Buying Options / Reviews

$109.00 Part #206G
QTY
In Stock
Additional Items
119413 119412
119413 119412
$7.99 - In Stock

More Information
QTY
5.7 Inch Motor Gasket
5.7 Inch Motor Gasket
$2.90 - In Stock

More Information
QTY
Motor Exhaust Coupling
Motor Exhaust Coupling
$3.73 - In Stock

More Information
QTY
Free Flow Maintenance Sheets
Free Flow Maintenance Sheets
$19.99 - In Stock

More Information
QTY
 

116472 Lamb Vacuum Motor


116472 Motor for Vacuums and Blowers

Product Details

116472 Lamb Vacuum Motor
Our brand new (not rebuilt) lamb 116472 motor, which replaces replaces 116472-13 and 116472-00, is a strong motor for it's size and use in many central vacuum brands and models. 116472 motor is a Lamb Ametek original motor.

Specifications:
  • Fan Stages - 2
  • Bottom Diameter - 5.7"
  • Voltage - 110-120
  • Hertz - 50-60
  • Height - 6.75"
  • Bolt Height - 2"
  • Waterlift - 106.7"
  • CFM - 112
  • AirWatts - 404
  • Amps - 10.7
What to note: Many motors have the number 6472 - it is actually a part number, so be sure your motor has the same measurements as this one. Also, the 119412 is similar except the lamb 116472 ametek has a limited warranty since it spins faster and therefore has a shorter life, but the upside is it has higher CFM and waterlift specs.

What motors it replaces: 116474, 117073, 117795, and 119260 motors.

When to replace: The signs that a 116472 lamb ametek motor needs to be replaced include: mini breaker popping, electrical smell, excessive blue sparks seen from motor top, you only hear a click, motor shuts down on its own but works later, or its life of 900-1,200 hours has been used up. (If you don't hear a click, then your relay most likely needs to be replaced and your motor may be fine). Five percent of the time, the minibreaker will go bad as well as the motor. If this happens, replace the motor and then evaluate the mini breaker.

How to replace: It is not difficult to replace the lamb 116472 motor. There are three bolts and a couple of wires. All of our customers are amazed at how easy it is. NOTE: There is no core trade-in. Used motors are thrown away. Click here to read and print out our step-by-step motor replacement instructions.

Replacing motor brushes: The 116472 ametek vacuum motor has carbon motor brushes that can be replaced. This should be done before a motor is "on its last legs." Read more about changing the motor brush on the detailed motor brush how-to page. If you are ready to replace your motor brushes, here is a link to the 116472 motor brush. You will need to buy two.

Buying Options / Reviews

$149.00 Part #209
QTY
Not In Stock Question
Additional Items
116764 116472
116764 116472
$16.44 - In Stock

More Information
QTY
5.7 Inch Motor Gasket
5.7 Inch Motor Gasket
$2.90 - In Stock

More Information
QTY
Free Flow Maintenance Sheets
Free Flow Maintenance Sheets
$19.99 - In Stock

More Information
QTY
 

116765 Lamb Central Vacuum Motor

116765 Motor for Vacuums and Blowers

Product Details

116765 Lamb Central Vacuum Motor
The brand new 116765 lamb ametek motor has been used by many brands in many models for many years. It is an industry favorite, and has a great combination of efficiency and powerful suction. The 116765 vacuum motor is by Lamb Ametek motor.

Specifications:
  • Fan Stages - 3
  • Bottom Diameter - 5.7"
  • Voltage - 110-120
  • Hertz - 50-60
  • Height - 8"
  • Bolt Height - 3"
  • Waterlift - 136"
  • CFM - 95
  • AirWatts - 465
  • Amps - 13.1
What to note: This lamb ametek 116765 vacuum motor may say 6765 or 11-6765.

What motors it replaces: 116565 and 6565.

When to replace: The signs that a 116765 lamb motor needs to be replaced include: mini breaker popping, electrical smell, excessive blue sparks seen from motor top, you only hear a click, motor shuts down on its own but works later, or its life of 900-1,200 hours has been used up. (If you don't hear a click, then your relay most likely needs to be replaced and your motor may be fine). Five percent of the time, the minibreaker will go bad as well as the motor. If this happens, replace the motor and then evaluate the mini breaker.

How to replace: It is not difficult to replace the 116765 ametek motor. There are three bolts and a couple of wires. All of our customers are amazed at how easy it is. NOTE: There is no core trade-in. Used motors are thrown away. Click here to read and print out our step-by-step motor replacement instructions.

Replacing motor brushes: The lamb 116765 ametek vacuum motor has carbon motor brushes that can be replaced. This should be done before a motor is "on its last legs." Read more about changing the motor brush on the detailed motor brush how-to page. If you are ready to replace your motor brushes, here is a link to the 116765 motor brush. You will need to buy two.

Buying Options / Reviews

$144.00 Part #199
QTY
In Stock
Additional Items
116765 117939
116765 117939
$9.49 - In Stock

More Information
QTY
5.7 Inch Motor Gasket
5.7 Inch Motor Gasket
$2.90 - In Stock

More Information
QTY
Free Flow Maintenance Sheets
Free Flow Maintenance Sheets
$19.99 - In Stock

More Information
QTY