MD Central Vacuum
Fast Free shipping
on orders over $75
Since 1961

12ft Extension Hose - Double your Cleaning Area.


12ft Extension Hose
12ft Extension Hose

Product Details

12ft Extension Hose - Double your Cleaning Area.

Essentially double the reachable cleaning area!
The Extension Hose allows you to save time by cleaning more area from a single vacuum port. Clean further, deeper, and easier than ever before. Extend a 30-foot central vacuum hose to 42 feet, a 35-foot hose to 47 feet, and so on! Clean indoors or outdoors. The Extension Hose is flexible, crushproof, easily stored, and comes with a 2-year warranty.

The Extension Hose intake connection is about 1-1/2 inch diameter with two metal nubs inside at the top or bottom. It plugs into the same diameter wall inlets. Use it for a valve hidden behind a sofa. You can leave it plugged in and not lose any suction. It is also a necessity for any unreachable areas:

  • Back rooms, closets, etc.
  • Patios and entries
  • Basement corners
  • Garages, cars, RVs
  • Full length of stairs

How to Use the Extension Hose
Simply plug the Extension Hose into your wall inlet and your hose into the Extension Hose - it is that easy! Also, permanently extend a valve location that is blocked by furniture. Simply insert the Extension Hose and leave it plugged in. Whenever you need to use it, simply open the door on the end of the Extension Hose and insert your regular hose!

Fits 99% of All Systems! - DOES NOT FIT TWO-PIN ELECTRICAL HOSES
The Extension Hose fits into all 1-7/16 inch to 1-1/2 inch diameter vacuum wall inlets, which are in 99% of all central vacuums, no matter the make, model or year. It extends the following hoses: 1) Standard or Basic Hoses (no switch on handle), 2) Low Voltage Hoses (2 way switch on handle), and 3) Corded Electric Hoses (three way switch). It is NOT compatible with direct connect electrical hoses - ones with two small pins on the wall end of the hose.

Buying Options / Reviews

$64.88 Part #380EXT
QTY
In Stock
 

Metal Stub Tube - Inlet Valves 1.25 Inch Diameter

Metal Stub Tube for 1.25 inch vacuum inlets

Product Details

Metal Stub Tube - Inlet Valves 1.25 Inch Diameter
Used to adapt a hose to fit Budd or Kenmore / Sears inlets and others that are 1.25 inch diameter (ones that start suction when OPENED). This adapter tightly slides into the end of the hose leaving the tapered end visible (we recommend tapping it in AT LEAST 3/4 INCH with rubber mallet or piece of wood). It fits into all Low Voltage, Electric Hoses, and Stretch Hoses. If it needs to go into a Basic Hose, it will only fit the Basic Hose with Tapered Cuff. (Note: the Reduced Tapered Cuff product is made up of the Tapered Cuff and this Metal Stub Tube.)

Buying Options / Reviews

$6.99 Part #302-1.25ST
QTY
In Stock