Skip to content
Shop Products

ThreeInletInstallationPartsandSupplies

Click any of the "add to cart" buttons to add the suggested installation supplies.
You can modify quantities now or later.


Return to Build Your Central Vacuum Installation Kit

90 Short PVC Vacuum Connector

90 Short PVC Vacuum Connector

90 Short PVC Vacuum Connector
Use this fitting at the mounting plates only. Since this is the sharpest turn in the system, potential clogging will occur with easy access - right at the inlet valve! If you need a case, enter 90 for the quantity.

Buying Options / Reviews

$1.40 Part #501

In Stock
 

90 Sweep PVC Vacuum Connector

90 Sweep PVC  Vacuum Connector

90 Sweep PVC Vacuum Connector
M.D. Manufacturing sells the highest quality fittings. We suggest avoiding PVC sch40 fittings. They are thin and leave a 'step' where the pipe connects. Toothpicks or pins can get stuck creating clogs. Also make sure fittings have a 3/4" cuff, not 1/2", to provide strength at joints. If you need a case, enter 115 for the quantity.

Buying Options / Reviews

$1.57 Part #502

In Stock
 

90 Spigot PVC Vacuum Connector

90 Spigot PVC  Vacuum Connector

90 Spigot PVC Vacuum Connector
Spigot fittings are made to fit directly into other fittings. This will prove helpful in tight spots! If you need a case of these enter 115.

Buying Options / Reviews

$1.74 Part #503

In Stock
 

45 Degree PVC Vacuum Connector

45 Degree PVC  Vacuum Connector

45 Degree PVC Vacuum Connector
We suggest using 45's, even two of them when possible, to use less 90's. When the pipe line needs to run up or down, angle a 90 at 45-degrees into a 45 fitting. If you need a case, enter 125 for the quantity.

Buying Options / Reviews

$1.54 Part #504

In Stock
 

45 Spigot PVC Vacuum Connector

45 Spigot  PVC  Vacuum Connector

45 Spigot PVC Vacuum Connector
Spigots fit directly into another fitting. If you need a case, enter 125 for the quantity.

Buying Options / Reviews

$1.12 Part #505

In Stock
 

Coupling PVC Vacuum Connector

Coupling PVC Vacuum Connector

Coupling PVC Vacuum Connector
For connecting two pieces of pipe together. If you need a case, enter 200 for the quantity.

Buying Options / Reviews

$0.72 Part #507

In Stock
 

90 Sweep Tee PVC Vacuum 3-way Connector

90 Sweep Tee PVC Vacuum 3-way Connector

90 Sweep Tee PVC Vacuum 3-way Connector
For connecting a branch to the main line. Be sure the airflow is adequate. Do not install the tee backwards! If you need a case, enter 45 for the quantity.

Buying Options / Reviews

$2.13 Part #508

In Stock
 

45 Wye PVC Vacuum 3-way Connector

45 Wye PVC Vacuum 3-way Connector

45 Wye PVC Vacuum 3-way Connector
For connecting a branch to the main line. Be sure the airflow is adequate. Do not install the wye backwards! If you need a case, enter 45 for the quantity.

Buying Options / Reviews

$2.63 Part #509

In Stock
 

Pipe Strap

Pipe Strap

Pipe Strap
Used mainly in existing home installations where the pipe is visible (in closets, for example). If you need a case, enter 500 for the quantity.

Buying Options / Reviews

$0.56 Part #512

In Stock
 

80ft PVC Central Vac Pipe (ten 8' tubes)

80ft PVC Central Vac Pipe (ten 8' tubes)

80ft PVC Central Vac Pipe (ten 8' tubes)
SHIPPED REGULAR GROUND ONLY.

Industry standard central vacuum pipe for seamless connections into central vacuum elbows/connection/fittings. Central vacuum pipe is thin, only 1/16" thick with a 2" outer diameter whereas SCH-40 (schedule 40) PVC pipe is measured by inner diameter and is thicker (3/16").
Made from virgin PVC. Manufactured to ASTM-F 2158 standards and has no schedule rating or pressure rating since it is not irrigation related. If you need a complete lift of pipe (800ft total) enter 10 as the quantity and it will ship out via truck.

Buying Options / Reviews

$99.95 Part #521-10

In Stock
 

40ft PVC Central Vac Pipe (ten 4ft tubes)

40ft PVC Central Vac Pipe (ten 4-ft) (Ground Ship)

40ft PVC Central Vac Pipe (ten 4ft tubes)
SHIPPED REGULAR GROUND ONLY.
Ten pipes, four feet long. Central vacuum installation pipe is used for seamless connections with central vacuum fittings. Unlike Schedule 40 PVC tube, this is thin walled and has a 2" outer diameter whereas SCH-40 plumbing pipe is thicker and measured by inner diameter. Use for installation, repairs, relocating a valve, adding a valve, exhausting, etc. Be sure to get extra PVC couplings (below) to fit it all together. This vacuum tubing is 2-inch outer diameter. Manufactured to ASTM standard F2158.

Buying Options / Reviews

$47.95 Part #520-10

In Stock
 

16ft PVC Central Vacuum Pipe (four 4 ft tubes)

16ft PVC Central Vacuum Pipe  (four 4-foot tubes)

16ft PVC Central Vacuum Pipe (four 4 ft tubes)
Great for small central vacuum jobs such as repairs, relocating a valve, adding a valve, exhausting, etc. Be sure to get extra PVC couplings (below) to fit it all together. This vacuum tubing is 2-inch outer diameter. Manufactured to ASTM standard F2158.

Buying Options / Reviews

$26.15 Part #520-4

In Stock
 

PVC Wire Ties 100 count

PVC Wire Ties 100 count

PVC Wire Ties 100 count
The low voltage wire that is run along the pipe should be anchored to the pipe every 4 feet and at every joint with these wire ties.

Buying Options / Reviews

$14.00 Part #545

In Stock
 

Pipe Collar

Pipe Collar

Pipe Collar
A cosmetic inlet facing, used in existing home installations where the pipe and low voltage wire go into the drywall. If you need a case, enter 100 for the quantity.

Buying Options / Reviews

$1.70 Part #513

In Stock
 

Exhaust Vent Door for Central Vacuum Pipe

Exhaust Vent Door for Central Vacuum Pipe

Exhaust Vent Door for Central Vacuum Pipe
Installed on the outside of the home to exhaust the power unit. This is not needed with M.D.'s bag type units. Fits 2" OD (Vacuum PVC Pipe). Overall size is 3-5/8"w X 4-5/8"h. Distance on the door flap is 2 3/4 inch. If you need a case, enter 40 for the quantity.

Buying Options / Reviews

$7.35 Part #518

In Stock
 

PVC Plaster Guard (2 per pack)

PVC Plaster Guard (2 per pack)

PVC Plaster Guard (2 per pack)
Useful in new construction installations to cover up the backing plate, protecting it from dry-walling and painting. Also lets drywallers know where to cut an opening. You can use a rectangle piece of cardboard to protect the hole and wires or one of these. NOTE: You'll need longer screws if your back mount is plastic and also note that this guard covers 90% of the back mount - the edges are open because the guard is rounded not square. If you need a case, enter 125 for the quantity.

Buying Options / Reviews

$7.37 Part #519

In Stock
 

Steel for Firewall 2 x 6 inch

Steel for Firewall 2 x 6 inch

Steel for Firewall 2 x 6 inch
For new construction when the pipe line penetrates the fire barrier wall in garages, for example. Use rubber cement and couplings to connect to standard vacuum PVC piping.

Buying Options / Reviews

$9.16 Part #523S

In Stock
 
Click any of the "add to cart" buttons to add the suggested installation supplies.
You can modify quantities now or later.


‚Äč