Overall I was happy with this replacement.The replacment part was not exactly the same as the old one but works just fine. there was no indicator light on the new switch but fit the same in the slot. Only thing I would have liked better is a diagram or parts sheet as there were a few extra pieces sent along that I wasn't sure where they were to be used.
The switch worked perfect. Also the shipping was fast.
Molded plastic wire guide piece did not fit without modification.
It was not quite the same as the old one, but I was able to make it work. Thanks.
The switch was easy to install and it work fine. the problem I have is that is the third switch that I have had to replace. It seems to me that they should last longer than that. also I would like to replace the entire handle but don't see that option on the website.
Didn't like having to buy the complete switch assy. when all I needed was the female receptacle
and the few inches of wire attached. But it worked.
Worked very well. Saved our hose for many more years of use. Highly recommended!
Everything went together quickly and smoothly. It is now working fine.
The old switch was no longer turning on the power vacuum and the central vac motor. Changing out with this switch fixed the problem.
Not as good quality as original, but good enough and at the right price. Thanks for all the Q&A, though, which help order the right part the first time.
It is a little difficult to connect the pistol handle to the rotary beater pipe. I am hoping it gets easier the more I use it.
I had no issues with the replacement switch assembly, it fit in and works very well!
Hello MD Central Vacuum,
The 3-way switch arrived quickly and I was able to install it without difficulty. The switch works fine and I am well pleased. Thank you for being the source that made my home repair a success. Your company will be in my files for future reference.
Sincerely,
Ken Overman
The plastic piece that separates the low voltage and high voltage wires was installed backwards in the assembly that I received. This was an assembly error and not a manufacturing or design error. This initially caused some frustration while installing the switch kit until I found this was preventing the two halves of the pistol handle from going together properly. I reversed the plastic piece and it fit together perfectly.
Three years ago I bought a new electric hose, carpet sweeper, and many accessories from MD's website with ease and have enjoyed all my purchases since. When the switch on my vacuum hose stopped working I was a little worried. After I opened up the handle and could see that the little circuit card at the switch was all black I knew it would need to be replaced. I found the part I needed very quickly on the website and I ordered it just as quickly. It arrived in two business days even though I spent no extra money on shipping. The part was so easy to install and it feels great to have done it myself. Thanks MD :)
The switch did not work with my vacuum beater head. They told me they would send an adaptor, but didn't. At least they did provide a refund for the purchase price (not including shipping) after calling back a 2nd time to check on the adaptor that was never sent.
(MD Notes: We contacted the customer and issued a refund for the original shipping cost as there seems to have been some miscommunication on our part. We do not have an adapter for the switch itself.)
Had to modify part slightly to work, but it was an easy modify and now works well.
It was great to get the exact replacement part and have the repair made in a few minutes. Everything matched up.
Kit works fine. Original contacts were a single contact design, replacement has duel contacts. Replacement screws came in handy, some of the original screws had striped drive slots. Most likly cause for failure was the handle being dropped on the switch.