TurboCat Central Vac Kit

The top selling TurboCat non-electric, air-driven turbine central vacuum cleaner for all central vacuum systems. Use any central vacuum hose with Turbocat, they are all compatible - guaranteed.

Vacuum pressure spins the turbine and beater brush for deep carpet grooming. Use non-button lock bottom extension wands to connect the hose to the TurboCat (wands are not included). Power head is 12.5-inch wide.

This TurboCat is made by HP Vacuflo (SKU 8695) and is the exact replacement for all colors of ANY power brush that looks like it including the following model names TurboCat II, TurboCat Plus, TL2000, T210, TP210, TurboCat V, Turbocat Vacuflo, Ultra TP210, VM179B, VM179, and Turbine Power Heads #7160, 7161, 7210, RD1990, and HD-1990. Confusing, yes, but there is only one power brush and it is sold under many different names.

Complete 30-day Satisfaction Money Back Guarantee.

TurboCat Accessory Kit Options

The advantage of an air driven turbine power head is they run without electricity and fit on every central vacuum hose in any system.

TurboCat Parts - Wheels, Neck, Roller, Turbine and much more.

Neck Elbow for TurboCat - Part MD#45509, #7216-02, item #9, on the exploded diagram for TurboCat, TL2000, TP210, and T210, etc. It does not include spring or spring plastic lever (numbers 45510, 45511).

Part #5966, item #10, on the exploded diagram fits TurboCat, TL2000, TP210, T210 and all others that look like the TurboCat.

Part 45609B "9B - Release Spring" fits all models including all TurboCat Platinum, Onyx, TurboCat EX and TurboCat Pro.

The Turbo-Cat, II, Plus, TL-2000, TP-210, Vacuflo, HD-1990, RD-1990 Belt, Turbocat Vacuflo, and T-210, are the exact same brush and have the exact same replacement parts. This is belt 7227 as seen in some manuals. Other manufacturers sold it as other model numbers such as VM179. We sell the gray and blue version of the brush and its parts that fit all colored units.
Cogged belt is 9/32" wide, 6 1/16" long when flattened, and the distance between cog peaks is 1/8".

Part #7224, item #17, on the exploded diagram fits TurboCats made in China only. It will not fit ones made in Canada or called II, Plus, TL2000, TP210, and T210, etc. If you have one of these please consider a new TurboCat or upgraded to a new air or electric hose and tool kit.

The Turbo-Cat, TurboCat II, TurboCat Plus, TL-2000, TP-210, Vacuflo, HD-1990, RD-1990 Belt, Turbocat Vacuflo, and T-210 are the exact same brush and must use this Air Turbine. Part #7213-X, item #3, on the exploded diagram.

COLOR IS DARK GREY. Light grey no longer available. This is Part #7821, item #2, on the exploded diagram fits TurboCat, TurboCat II, TurboCat Plus, TL2000, T210, TurboCat V, VM179B, VM179, Ultra TP210, and Turbine Power head #7160, 7161, 7210, RD1990, HD-1990 Turbocat Vacuflo. NOTE: May come in dark gray

Part #7821, item #2, on the exploded diagram. Fits TurboCat, TurboCat II, TurboCat Plus, TL2000, T210, TurboCat V, VM179B, VM179, Ultra TP210, and Turbine Power head #7160, 7161, 7210, RD1990, HD-1990 Turbocat Vacuflo Only blue available.

SOLD INDIVIDUALLY Enter "1" for one wheel, etc.

Part #7214, item #4, on the exploded diagram fits TurboCat, TL2000, TP210, and T210.

Part #7215, item #5, on the exploded diagram fits TurboCat, TL2000, TP210, and T210.

Part #5958, item #6, on the exploded diagram fits TurboCat, TL2000, TP210, and T210.

Part #5974, item #7, on the exploded diagram fits TurboCat, TL2000, TP210, and T210.

Part #5971, item #8, on the exploded diagram fits TurboCat, TL2000, TP210, T210, and all TurboCat Zoom models including all TurboCat Platinum, Onyx, TurboCat EX and TurboCat Pro.

Part #7217-02, item #11, on the exploded diagram fits TurboCat, TL2000, TP210, and T210.

Part #7218, item #12, on the exploded diagram fits TurboCat, TL2000, TP210, and T210.

Part #7221, item #13, on the exploded diagram fits TurboCat, TL2000, TP210, and T210. GREY COLOR fits all colored models.

Part #7822 or 7222, item #14, on the exploded diagram fits TurboCat, TL2000, TP210, and T210. NOTE: THE BUMPER WE STOCK doesn't have a bottom lip as pictured. The one we sell has tabs that pop into the chasis.

Part #7223, item #15, on the exploded diagram fits TurboCat, TL2000, TP210, and T210.

Part #7224, item #16, on the exploded diagram fits TurboCat, TL2000, TP210, and T210.

Part #7226, item #18, on the exploded diagram fits TurboCat, TL2000, TP210, and T210.

Part #7228, item #20, on the exploded diagram fits TurboCat, TL2000, TP210, and T210. SCREWS SOLD INDIVIDUALLY

Part #7229, item #21, on the exploded diagram fits TurboCat, TL2000, TP210, and T210.

(Not Pictured) 9 Screws fits TurboCat, TL2000, TP210, and T210.

Part #7230, item #23, on the exploded diagram fits TurboCat, TL2000, TP210, and T210.

Part #7231, 7234, and 7233 now come in a single product. Not sold individually. Fits TurboCat, TL2000, TP210, and T210. Contains D-Washer, Bearing Needle and Idler Shaft; items #24, 25, and 26 on the exploded diagram. Note: the belt crosses itself over the items. The belt goes above the item, not above and below this item.

Part #7232, item #27, on the exploded diagram fits TurboCat, TL2000, TP210, and T210. COMES WITH TWO. One order gives you TWO flanges.

Part #7235, item #28, on the exploded diagram fits TurboCat, TL2000, TP210, and T210.

Right Shaft Support TurboCat
Part MD#45529, #7236, item #29.

Part #7237, item #30, on the exploded diagram fits TurboCat, TL2000, TP210, and T210.

Part #7238, item #31, on the exploded diagram fits TurboCat, TL2000, TP210, and T210.

Part #7239, item #32, on the exploded diagram fits TurboCat, TL2000, TP210, and T210.

Part #7331, item #34, on the exploded diagram fits TurboCat, TL2000, TP210, and T210.

Lower Shroud, Belt, -TurboCat, TL2000, TP210, T210. Part #7332, item #35, on the exploded diagram.

Replacement bleeder valve hole cover. 1-1/4" inner diameter, 3/4" wide. Product fits all models including all TurboCat Platinum, Onyx, TurboCat EX and TurboCat Pro. Fits Electric and Low Voltage and Basic hoses with a bleeder hole in the metal stub tube.

The entire switch assembly and wires are included - minus the handle. Used in Low Voltage on/off switch hoses that control the vacuum suction (not an electric power brush). Note that the #382H Handle and newer Low Voltage Hoses will also fit this by unsnapping the black switch from the gray plastic. (Older, pre-1999, low voltage hoses will require splicing in the older contact board or you can special order Plastiflex #SH130efhr01.)

This part replaces the 2-way switch assembly in hoses made by Plastiflex. Plastiflex hoses have a "P" within a circle molded into the wall end cuff. Most all hoses on the market are made by Plastiflex including Wessel, Stealth, Ace, Beam, Nutone, Vacuflo, AirVac, M&S, to name a very few.

Complete Electric Hoses & Help | Find Hoses by Brand

Comes with the metal stub tube coming out of the hose handle. The metal stub tube does NOT have a button lock nipple (available on complete Low Voltage hose 382BL and 383BL or alone #382HBG). This part is used on Low Voltage hoses including MD's part # 381, 382, 383. Note that #382S fits it after removing the grey plastic portion away from the black switch.

Replacement Part Instructions

Looking for the Low Voltage Hose Handle with BUTTON LOCK?

Comes with the metal stub tube coming out of the hose handle. The metal stub tube does have a button lock nipple. This part is used on Low Voltage hoses including MD's part # 382BL and 383BL. Note that #382S fits it after removing the grey plastic portion away from the black switch.

Looking for the Low Voltage Hose Handle WITHOUT button lock?

Take a look at ALL HOSE TYPES to make sure you get the right hose - and don't pay attention to the handle shape. The Low Voltage Hose has a switch to control suction but DOES NOT control any electric power brush - you'll need an Electric Hose for that.

The dark silver low voltage hose with black gas-pump handle offers the convenience of turning the suction on and off without having to run back to the wall inlet. The Low Voltage Hose is far superior for every application wherever the Basic Hose can be used. The Low Voltage hose does not have 110-volts, only a low voltage wire to allow the suction circuit to be on or off. Use this central vacuum hose for all air-driven power heads, it is worth the extra money.

• Ergonomic Gas-pump Style Handle
• 2-way Switch Controls Suction
• 360-Swivel for Fewer Kinks
• Crushproof, Pliable Hose
• Lightweight, Easy to Use & Store
• 27% More Air Flow Over Older Hoses*
• Air Flow Adjustability
• Durable Metal Hose End
• Full 3-Year Warranty
• 30-Day Complete Satisfaction Guarantee
• Fits 1-7/16" to 1-1/2" Diameter Inlets
  

*After 2004 the interior of the hose increased to 1-3/8" diameter and was made smoother for maximum performance.

All accessories are compatible with this central vacuum hose, including the button lock version. Accessories, wands, and brushes sold separately. Hose numbers include 382GE, 383GE, 382GEBL, 383GEBL.
_____________________________________________________________

Looking for parts? See our Low Voltage Hose Parts.